EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Femtosecond Laser Processing Assisted SiC High-Temperature Pressure Sensor Fabrication and Performance Test

You Zhao, Yulong Zhao, Lukang Wang iD, Yu Yang, Yabing Wang

Micromachines · 28.02.2023 · 14 (3) · 587

DOI: 10.3390/mi14030587 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 28.02.2023. Verfasst von You Zhao und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Projects of Shaanxi Province of China, the Postdoctoral Foundation of Shaanxi Province of China, the Special Fund for Technology Innovation Guidance of Shaanxi Province of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to material plastic deformation and current leakage at high temperatures, SOI (silicon-on-insulator) and SOS (silicon-on-sapphire) pressure sensors have difficulty working over 500 °C. Silicon carbide (SiC) is a promising sensor material to solve this problem because of its stable mechanical and electrical properties at high temperatures. However, SiC is difficult to process which hinders its application as a high-temperature pressure sensor. This study proposes a piezoresistive SiC pressure sensor fabrication method to overcome the difficulties in SiC processing, especially deep etching. The sensor was processed by a combination of ICP (inductive coupled plasma) dry etching, high-temperature rapid annealing and femtosecond laser deep etching. Static and dynamic calibration tests show that the accuracy error of the fabricated sensor can reach 0.33%FS, and the dynamic signal response time is 1.2 μs. High and low temperature test results show that the developed sensor is able to work at temperatures from −50 °C to 600 °C, which demonstrates the feasibility of the proposed sensor fabrication method.

Schlagwörter

Stichwörter der Autor:innen

SiCfabrication methodfeasibilityhigh temperaturepressure sensor

Autor:innen und Institutionen

  • State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China.

ORCID-Profile: Lukang Wang

Förderung

  • Key Research and Development Projects of Shaanxi Province of China
  • the Postdoctoral Foundation of Shaanxi Province of China
  • the Special Fund for Technology Innovation Guidance of Shaanxi Province of China
  • Postdoctoral Foundation of Shaanxi Province of China
  • Special Fund for Technology Innovation Guidance of Shaanxi Province of China

Zitieren

APA

Zhao, Y., Zhao, Y., Wang, L., Yang, Y., & Wang, Y. (2023). Femtosecond Laser Processing Assisted SiC High-Temperature Pressure Sensor Fabrication and Performance Test. Micromachines, 14(3), 587. https://doi.org/10.3390/mi14030587

Vancouver

Zhao Y, Zhao Y, Wang L, Yang Y, Wang Y. Femtosecond Laser Processing Assisted SiC High-Temperature Pressure Sensor Fabrication and Performance Test. Micromachines. 2023;14(3):587. doi:10.3390/mi14030587

BibTeX
@article{Zhao2023,
  author = {Zhao, You and Zhao, Yulong and Wang, Lukang and Yang, Yu and Wang, Yabing},
  title = {Femtosecond Laser Processing Assisted SiC High-Temperature Pressure Sensor Fabrication and Performance Test},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {3},
  pages = {587},
  doi = {10.3390/mi14030587}
}
Kostenlos starten →