EUVIMEDEUVIMED entdecken
Crossref

FPI-FBG Cascaded High-Temperature Pressure Sensor up to 700 °C Based on Vernier Effect Utilizing Femtosecond Laser

Rui Liang, Hongtian Zhu, Xiang Zhu, Maocheng Guo, Qi Zhang, Zhixuan Su, Jiamin Chen, Zhenyin Hai, Yongqiu Zheng, Chenyang Xue

IEEE Sensors Journal · 15.09.2024 · 24 (18) · 28818-28826

DOI: 10.1109/jsen.2024.3429520 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 15.09.2024. Verfasst von Rui Liang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A fiber optic high-temperature pressure dual parametric sensor utilizing femtosecond laser technology based on the Vernier effect is proposed, demonstrated, and experimentally validated for gas pressure and temperature monitoring in high-temperature environments. The sensor features two parallel Fabry-Pérot interferometers (FPIs) and a fiber Bragg grating (FBG). Each FPI is fabricated using femtosecond laser-induced water breakdown and arc discharge techniques, serving as the sensing FPI and the reference FPI, respectively. These FPIs have closely matched free spectral ranges (FSRs), producing the traditional Vernier effect to enhance pressure sensitivity. Additionally, an FBG prepared with femtosecond laser technology is cascaded in front of the sensing FPI to measure gas temperature and compensate for pressure variations. The sensor was validated by a two-parameter experiment at $700~^{\circ }$ C and 5 MPa. At room temperature ( $24.7~^{\circ }$ C), the gas pressure sensitivity of this sensor is approximately 18.66 nm/MPa, which is about 4.7 times greater than that of a single sensing FPI. At a high temperature of $700~^{\circ }$ C, the gas pressure sensitivity is approximately 6.09 nm/MPa. The temperature sensitivity of the FBG for temperature measurement is 12.4 pm/°C. The sensor exhibits a maximum full-scale pressure error of 5.68% across the entire temperature range, utilizing the FBG to measure gas temperature and compensate for pressure sensitivity. This sensor demonstrates high-temperature resistance and high-pressure sensitivity, making it suitable for gas temperature-pressure dual parameter monitoring in high-temperature environments. Additionally, it is easy to fabricate and exhibit robustness, sensitivity, and reliability.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liang, R., Zhu, H., Zhu, X., Guo, M., Zhang, Q., Su, Z., Chen, J., Hai, Z., Zheng, Y., & Xue, C. (2024). FPI-FBG Cascaded High-Temperature Pressure Sensor up to 700 °C Based on Vernier Effect Utilizing Femtosecond Laser. IEEE Sensors Journal, 24(18), 28818-28826. https://doi.org/10.1109/jsen.2024.3429520

Vancouver

Liang R, Zhu H, Zhu X, Guo M, Zhang Q, Su Z, et al. FPI-FBG Cascaded High-Temperature Pressure Sensor up to 700 °C Based on Vernier Effect Utilizing Femtosecond Laser. IEEE Sensors Journal. 2024;24(18):28818-28826. doi:10.1109/jsen.2024.3429520

BibTeX
@article{Liang2024,
  author = {Liang, Rui and Zhu, Hongtian and Zhu, Xiang and Guo, Maocheng and Zhang, Qi and Su, Zhixuan and Chen, Jiamin and Hai, Zhenyin and Zheng, Yongqiu and Xue, Chenyang},
  title = {FPI-FBG Cascaded High-Temperature Pressure Sensor up to 700 °C Based on Vernier Effect Utilizing Femtosecond Laser},
  journal = {IEEE Sensors Journal},
  year = {2024},
  volume = {24},
  number = {18},
  pages = {28818--28826},
  doi = {10.1109/jsen.2024.3429520}
}
Kostenlos starten →