EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Transferability of Diffractive Structure in the Compression Molding of Chalcogenide Glass

Byeong-Rea Son, Ji-Kwan Kim, Young-Soo Choi, Changsin Park iD

Micromachines · 20.01.2023 · 14 (2) · 273

DOI: 10.3390/mi14020273 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.01.2023. Verfasst von Byeong-Rea Son und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Automotive Engineering, Honam University, Gwangju 62399, Republic of Korea. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the use of Ge28Sb12Se60 chalcogenide glass for the compression molding of an infrared optical lens with a diffractive structure. Firstly, a mold core was prepared through ultra-precision grinding of tungsten carbide, and a chalcogenide glass preform was crafted through a polishing process and designed with a radius that would prevent gas isolation during the molding process. The test lens was then molded at various temperature conditions using the prepared mold core and preform. The diffractive structures of both the mold core and the resulting molded lens were analyzed using a microscope and white light interferometer. The comparison of these diffractive structures revealed that the molding temperature had an effect on the transferability of the diffractive structure during the molding of the chalcogenide glass lens. Furthermore, it was determined that, when the molding temperature was properly adjusted, the diffractive structure of the core could be fully transferred to the surface of the chalcogenide lens. Optimized chalcogenide glass-based lenses have the potential to serve as cost-effective yet high-performance IR optics.

Schlagwörter

Stichwörter der Autor:innen

chalcogenide glasscompression moldingdiffractive structureinfrared optical lens

Autor:innen und Institutionen

  • Department of Automotive Engineering, Honam University, Gwangju 62399, Republic of Korea.
  • Department of Mechanical Convergence Engineering, Gwangju University, Gwangju 61743, Republic of Korea.

ORCID-Profile: Changsin Park

Zitieren

APA

Son, B. R., Kim, J. K., Choi, Y. S., & Park, C. (2023). Transferability of Diffractive Structure in the Compression Molding of Chalcogenide Glass. Micromachines, 14(2), 273. https://doi.org/10.3390/mi14020273

Vancouver

Son BR, Kim JK, Choi YS, Park C. Transferability of Diffractive Structure in the Compression Molding of Chalcogenide Glass. Micromachines. 2023;14(2):273. doi:10.3390/mi14020273

BibTeX
@article{Son2023,
  author = {Son, Byeong-Rea and Kim, Ji-Kwan and Choi, Young-Soo and Park, Changsin},
  title = {Transferability of Diffractive Structure in the Compression Molding of Chalcogenide Glass},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {2},
  pages = {273},
  doi = {10.3390/mi14020273}
}
Kostenlos starten →