Injection Molding of Encapsulated Diffractive Optical Elements
Micromachines · 09.06.2023 · 14 (6) · 1223
DOI: 10.3390/mi14061223 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 09.06.2023. Verfasst von Stefan Wagner und 9 weiteren Autor:innen. Beteiligte Einrichtung: Hahn-Schickard, Allmandring 9B, 70569 Stuttgart, Germany. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federation of Industrial Research Associations (AiF), Federal Ministry of Economic Affairs and Climate Action through the German Federation of Industrial Research Associations (AiF) as part of the program for prom…, German Research Foundation (DFG).
Abstract (Originalsprache)
Microstructuring techniques, such as laser direct writing, enable the integration of microstructures into conventional polymer lens systems and may be used to generate advanced functionality. Hybrid polymer lenses combining multiple functions such as diffraction and refraction in a single component become possible. In this paper, a process chain to enable encapsulated and aligned optical systems with advanced functionality in a cost-efficient way is presented. Within a surface diameter of 30 mm, diffractive optical microstructures are integrated in an optical system based on two conventional polymer lenses. To ensure precise alignment between the lens surfaces and the microstructure, resist-coated ultra-precision-turned brass substrates are structured via laser direct writing, and the resulting master structures with a height of less than 0.002 mm are replicated into metallic nickel plates via electroforming. The functionality of the lens system is demonstrated through the production of a zero refractive element. This approach provides a cost-efficient and highly accurate method for producing complicated optical systems with integrated alignment and advanced functionality.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hahn-Schickard, Allmandring 9B, 70569 Stuttgart, Germany.
- Institute for Micro Integration (IFM), Faculty 7-Engineering Design, Production Engineering and Automotive Engineering, University of Stuttgart, Allmandring 9B, 70569 Stuttgart, Germany.
- Institute for Applied Optics, Pfaffenwaldring 9, 70569 Stuttgart, Germany.
ORCID-Profile: Thomas Guenther, Alois Herkommer, André Zimmermann
Förderung
- German Federation of Industrial Research Associations (AiF)
- Federal Ministry of Economic Affairs and Climate Action through the German Federation of Industrial Research Associations (AiF) as part of the program for prom…
- German Research Foundation (DFG)
Zitieren
APA
Wagner, S., Treptow, K., Weser, S., Drexler, M., Sahakalkan, S., Eberhardt, W., Guenther, T., Pruss, C., Herkommer, A., & Zimmermann, A. (2023). Injection Molding of Encapsulated Diffractive Optical Elements. Micromachines, 14(6), 1223. https://doi.org/10.3390/mi14061223
Vancouver
Wagner S, Treptow K, Weser S, Drexler M, Sahakalkan S, Eberhardt W, et al. Injection Molding of Encapsulated Diffractive Optical Elements. Micromachines. 2023;14(6):1223. doi:10.3390/mi14061223
BibTeX
@article{Wagner2023,
author = {Wagner, Stefan and Treptow, Kevin and Weser, Sascha and Drexler, Marc and Sahakalkan, Serhat and Eberhardt, Wolfgang and Guenther, Thomas and Pruss, Christof and Herkommer, Alois and Zimmermann, André},
title = {Injection Molding of Encapsulated Diffractive Optical Elements},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {6},
pages = {1223},
doi = {10.3390/mi14061223}
}
EUVIMED