Development and Preliminary Validation of a Hygrothermal Chamber with Mass Monitoring Built from a Reused Oven
Metrology · 13.11.2026 · 6 (4) · 86
DOI: 10.3390/metrology6040086 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metrology, online erschienen am 13.11.2026. Verfasst von Brice Praya und 3 weiteren Autor:innen. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Experimental determination of the hygric properties of building materials often relies on costly equipment, limiting access in resource-constrained laboratories. This study presents the development and preliminary validation of a hygrothermal chamber with continuous mass monitoring, built from a reused laboratory oven. The system independently regulates temperature and relative humidity (RH) and continuously measures sample mass, using approximately €146 in components (excluding the oven). Its performance was assessed under three hygrothermal scenarios using six materials, with comparisons against a climatic chamber and saturated salt solutions. The mean absolute error (MAE) and root mean square error (RMSE) relative to the setpoints were 0.41 °C and 0.96 °C for temperature and 0.43 %RH and 1.30 %RH for relative humidity, respectively. The load cell could not reliably resolve the small mass changes of non-hygroscopic crushed glass. For a single Moabi wood specimen, comparison with a reference balance yielded an MAE of 1.26 and an RMSE of 1.38 percentage points of dry-mass water content (N=9), with a positive mean bias of 1.18 percentage points. The chamber offers a promising low-cost platform for preliminary hygric experiments, although further validation is needed. Sorption isotherms, water vapor permeability and moisture buffer value remain to be determined.
Zitieren
APA
Praya, B., Bigot, D., Malet-Damour, B., & Rivière, G. (2026). Development and Preliminary Validation of a Hygrothermal Chamber with Mass Monitoring Built from a Reused Oven. Metrology, 6(4), 86. https://doi.org/10.3390/metrology6040086
Vancouver
Praya B, Bigot D, Malet-Damour B, Rivière G. Development and Preliminary Validation of a Hygrothermal Chamber with Mass Monitoring Built from a Reused Oven. Metrology. 2026;6(4):86. doi:10.3390/metrology6040086
BibTeX
@article{Praya2026,
author = {Praya, Brice and Bigot, Dimitri and Malet-Damour, Bruno and Rivière, Garry},
title = {Development and Preliminary Validation of a Hygrothermal Chamber with Mass Monitoring Built from a Reused Oven},
journal = {Metrology},
year = {2026},
volume = {6},
number = {4},
pages = {86},
doi = {10.3390/metrology6040086}
}
EUVIMED