EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Process Parameter Analysis and Microstructural Evolution in Underwater Oscillating Laser Welded 304 Stainless Steel

Rui Yang, Pengfei Wang, Junjie Hu, Huanghai Zhou, Jida Wang, Hongliang Li, Ke Han

Metals · 14.09.2026 · 16 (9) · 1022

DOI: 10.3390/met16091022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 14.09.2026. Verfasst von Rui Yang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Qinglan Project of Jiangsu Province, Science and Technology Planning Social Development Project of Zhenjiang City.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses the challenges of porosity defects and grain coarsening inherent to local dry underwater laser welding of 304 austenitic stainless steel, a material widely used in nuclear power and marine engineering. To mitigate these issues, laser beam oscillation was integrated with a double-layer gas-curtain drainage system to secure a stable local dry environment. The individual effects of six key process parameters, including laser power, welding speed, wire feed rate, defocusing distance, oscillation frequency, and oscillation amplitude, on weld penetration, dilution ratio, and porosity were systematically investigated. Orthogonal design and range analysis quantified the relative significance of each parameter on weld morphology and defect formation. The results demonstrate that oscillation amplitude exerts the primary control over weld penetration, followed by defocusing distance, whereas oscillation frequency shows the least influence. Similarly, oscillation amplitude dominates porosity suppression, with defocusing distance acting as a secondary factor. Microstructural analysis indicated that high-frequency beam oscillation homogenizes the spatial energy distribution and induces forced convection within the molten pool. It is inferred that this dynamic stirring breaks up continuous columnar dendrites, decreases the average grain size from 32.37 to 21.52 μm (a 33.5% reduction), and effectively reduces porosity. Overall, this work provides empirical process data and microstructural control that may serve as a reference for future underwater laser repair applications.

Förderung

  • National Natural Science Foundation of China
  • Qinglan Project of Jiangsu Province
  • Science and Technology Planning Social Development Project of Zhenjiang City

Zitieren

APA

Yang, R., Wang, P., Hu, J., Zhou, H., Wang, J., Li, H., & Han, K. (2026). Process Parameter Analysis and Microstructural Evolution in Underwater Oscillating Laser Welded 304 Stainless Steel. Metals, 16(9), 1022. https://doi.org/10.3390/met16091022

Vancouver

Yang R, Wang P, Hu J, Zhou H, Wang J, Li H, et al. Process Parameter Analysis and Microstructural Evolution in Underwater Oscillating Laser Welded 304 Stainless Steel. Metals. 2026;16(9):1022. doi:10.3390/met16091022

BibTeX
@article{Yang2026,
  author = {Yang, Rui and Wang, Pengfei and Hu, Junjie and Zhou, Huanghai and Wang, Jida and Li, Hongliang and Han, Ke},
  title = {Process Parameter Analysis and Microstructural Evolution in Underwater Oscillating Laser Welded 304 Stainless Steel},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {9},
  pages = {1022},
  doi = {10.3390/met16091022}
}
Kostenlos starten →