EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural and Mechanical Characterization of the Laser Beam Welded SAF 2507 Super-Duplex Stainless Steel

Beáta Šimeková, Mária Dománková, Ingrid Kovaříková, Pavel Kovačócy, Maroš Martinkovič, Michal Šimek, Luke Ciuła

Metals · 17.10.2024 · 14 (10) · 1184

DOI: 10.3390/met14101184 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 17.10.2024. Verfasst von Beáta Šimeková und 6 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovak Research and Development Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of laser beam welding parameters (power, welding rate, focusing, head oscillation, shielding gas) on the microstructure, mechanical properties and corrosion resistance of the super-duplex stainless steel SAF 2507 was studied in this paper. The presented results clearly report the effects of welding parameter changes on the character of the steel’s microstructure. The presence of secondary phase M2N in weld metals has an important influence on their mechanical properties. Optimal mechanical properties, an acceptable ferrite/austenite ratio, and the minimum content of M2N nitride required in the weld metal were acquired in the case the following application: 1100 W power, welding speed of 10 mm/s, focusing of 4 mm, and pure nitrogen shielding gas (20 L/min).

Förderung

  • Slovak Research and Development Agency

Zitieren

APA

Šimeková, B., Dománková, M., Kovaříková, I., Kovačócy, P., Martinkovič, M., Šimek, M., & Ciuła, L. (2024). Microstructural and Mechanical Characterization of the Laser Beam Welded SAF 2507 Super-Duplex Stainless Steel. Metals, 14(10), 1184. https://doi.org/10.3390/met14101184

Vancouver

Šimeková B, Dománková M, Kovaříková I, Kovačócy P, Martinkovič M, Šimek M, et al. Microstructural and Mechanical Characterization of the Laser Beam Welded SAF 2507 Super-Duplex Stainless Steel. Metals. 2024;14(10):1184. doi:10.3390/met14101184

BibTeX
@article{imekov2024,
  author = {Šimeková, Beáta and Dománková, Mária and Kovaříková, Ingrid and Kovačócy, Pavel and Martinkovič, Maroš and Šimek, Michal and Ciuła, Luke},
  title = {Microstructural and Mechanical Characterization of the Laser Beam Welded SAF 2507 Super-Duplex Stainless Steel},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {10},
  pages = {1184},
  doi = {10.3390/met14101184}
}
Kostenlos starten →