EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Assessment of TiN Formation on NiTi Alloy and the Corrosion Resistance of TiN/NiTi Alloy Using First-Principles Calculation

Yunfei Wang, Haodong He, Huan Yang, Weijian Li, Zhiyong Gao, Haizhen Wang, Xiaoyang Yi

Metals · 29.09.2025 · 15 (10) · 1089

DOI: 10.3390/met15101089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 29.09.2025. Verfasst von Yunfei Wang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Development Plan of the Shandong Province Young Innovation Team of Higher Education Institutions, National Natural Science Foundation of China, Natural Science Foundation of Shandong Province, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the interfacial bonding properties between (110)NiTi and (200)TiN interfaces, as well as the adsorption capacity of Cl− on the surfaces of (110)NiTi and (200)TiN, were investigated using the first-principles computational method based on density functional theory (DFT). Four types of interfacial models between (110)NiTi and (200)TiN were developed. It was found that the interfacial bonding energies of the four interface models are greater than zero, indicating stable interface bonding between (110)NiTi and (200)TiN. For comparison, model III (N of (200)TiN is located at the bridge size between Ti and Ni in (110)NiTi) has the largest Wad value of 9.773 J/m2, which is attributed to stronger N-Ti bonding at the interface. Based on interface model III, an interfacial model of Cl− at three different adsorption locations (top, bridge, and hole) on the (110)NiTi and (200)TiN surfaces, respectively, was constructed. The results reveal that the adsorption energies of Cl− on the surface of (110)NiTi are significantly less than those of the Cl− on the surface of (200)TiN. This suggests that (110)NiTi is more likely to react with Cl−. Hence, the introduction of a TiN layer on the surface of NiTi alloy can effectively improve its corrosion resistance.

Förderung

  • Development Plan of the Shandong Province Young Innovation Team of Higher Education Institutions
  • National Natural Science Foundation of China
  • Natural Science Foundation of Shandong Province, China
  • Fundamental Research Projects of the Science and Technology Innovation and Development Plan of Yantai City
  • National Key Research and Development Program

Zitieren

APA

Wang, Y., He, H., Yang, H., Li, W., Gao, Z., Wang, H., & Yi, X. (2025). An Assessment of TiN Formation on NiTi Alloy and the Corrosion Resistance of TiN/NiTi Alloy Using First-Principles Calculation. Metals, 15(10), 1089. https://doi.org/10.3390/met15101089

Vancouver

Wang Y, He H, Yang H, Li W, Gao Z, Wang H, et al. An Assessment of TiN Formation on NiTi Alloy and the Corrosion Resistance of TiN/NiTi Alloy Using First-Principles Calculation. Metals. 2025;15(10):1089. doi:10.3390/met15101089

BibTeX
@article{Wang2025,
  author = {Wang, Yunfei and He, Haodong and Yang, Huan and Li, Weijian and Gao, Zhiyong and Wang, Haizhen and Yi, Xiaoyang},
  title = {An Assessment of TiN Formation on NiTi Alloy and the Corrosion Resistance of TiN/NiTi Alloy Using First-Principles Calculation},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {10},
  pages = {1089},
  doi = {10.3390/met15101089}
}
Kostenlos starten →