Corrosion and Interfacial Contact Resistance of NiTi Alloy as a Promising Bipolar Plate for PEMFC
Molecules · 05.08.2024 · 29 (15) · 3696
DOI: 10.3390/molecules29153696 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 05.08.2024. Verfasst von Yingping Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation, Project of Educational Commission of Guangdong Province of China.
Abstract (Originalsprache)
Titanium (Ti) is generally considered as an ideal bipolar plate (BPP) material because of its excellent corrosion resistance, good machinability and lightweight nature. However, the easy-passivation property, which leads to increased interfacial contact resistance (ICR) and subsequently decreased cell performance, limits its large-scale commercial application in proton exchange membrane fuel cells (PEMFCs). In this paper, we proposed a NiTi alloy prepared by suction casting as a promising bipolar plate for PEMFCs. This NiTi alloy exhibits significantly decreased ICR values (16.8 mΩ cm2 at 1.4 MPa) compared with pure Ti (88.6 mΩ cm2 at 1.4 MPa), along with enhanced corrosion resistance compared with pure nickel (Ni). The superior corrosion resistance of NiTi alloy is accredited to the nobler open circuit potential and corrosion potential, coupled with low corrosion current densities and passive current densities. The improved ICR can be interpreted by the existence of high-proportioned metallic Ni in the passive film, which contributes to the reduced capacitance characteristic of the passive film (compared with Ti) and enhances charge conduction. This work provides a feasible option to ameliorate BPP material that may have desirable corrosion resistance and ICR.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China.
- Key Laboratory of Green Surface Technology and Functional Coatings for Materials, China National Light Industry, Foshan University, Foshan 528000, China.
- School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China.
- Analytical and Testing Center, Wuhan University of Science and Technology, Wuhan 430081, China.
- School of Materials Science and Engineering, Jingdezhen Ceramic University, Jingdezhen 333403, China.
ORCID-Profile: Qiongyu Zhou
Förderung
- National Natural Science Foundation of China
- Guangdong Basic and Applied Basic Research Foundation
- Project of Educational Commission of Guangdong Province of China
- Project of Foshan Education Bureau
Zitieren
APA
Li, Y., Wang, X., Li, Y., He, Z., Zhang, G., Wang, Z., Wang, S., Hu, F., & Zhou, Q. (2024). Corrosion and Interfacial Contact Resistance of NiTi Alloy as a Promising Bipolar Plate for PEMFC. Molecules, 29(15), 3696. https://doi.org/10.3390/molecules29153696
Vancouver
Li Y, Wang X, Li Y, He Z, Zhang G, Wang Z, et al. Corrosion and Interfacial Contact Resistance of NiTi Alloy as a Promising Bipolar Plate for PEMFC. Molecules. 2024;29(15):3696. doi:10.3390/molecules29153696
BibTeX
@article{Li2024,
author = {Li, Yingping and Wang, Xiaofen and Li, Yuanyuan and He, Zhuo and Zhang, Guohong and Wang, Zhen and Wang, Shaohua and Hu, Fei and Zhou, Qiongyu},
title = {Corrosion and Interfacial Contact Resistance of NiTi Alloy as a Promising Bipolar Plate for PEMFC},
journal = {Molecules},
year = {2024},
volume = {29},
number = {15},
pages = {3696},
doi = {10.3390/molecules29153696}
}
EUVIMED