EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Vitro Corrosion Resistance and Mechanical Properties of Ag-SiO2-TiO2 Coatings Electrophoretically Deposited on NiTi Alloy

Bożena Łosiewicz, Julian Kubisztal, Adrian Barylski, Karolina Dudek

Coatings · 08.10.2025 · 15 (10) · 1176

DOI: 10.3390/coatings15101176 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 08.10.2025. Verfasst von Bożena Łosiewicz und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Center in Poland (NCN).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

NiTi alloys are widely used in biomedical applications due to their shape memory and superelastic properties. However, their surface reactivity requires protective, biofunctional coatings. To enhance NiTi performance, its surface was modified with an Ag-SiO2-TiO2 nanocoating containing small amounts of silica and silver. The coating’s primary phase was rutile with structural defects and a silver solid solution. It showed good adhesion, high scratch resistance, and improved corrosion behavior in Ringer’s solution, as demonstrated by EIS and cyclic polarization. EIS revealed high low-frequency impedance and two time constants, suggesting both barrier protection and slower electrochemical processes. Despite low breakdown and repassivation potentials, the coating effectively limited uniform corrosion. SEM/EDS confirmed localized degradation and partial substrate exposure, while elemental mapping showed well-dispersed silica and silver in a TiO2-rich matrix. The proposed pitting mechanism involves chloride-induced depassivation and galvanic effects. Surface potential mapping indicated electrostatic heterogeneity, mitigated by silica. The coating offers a balanced combination of corrosion protection and biofunctionality, supporting its potential for implant use.

Förderung

  • National Science Center in Poland (NCN)

Zitieren

APA

Łosiewicz, B., Kubisztal, J., Barylski, A., & Dudek, K. (2025). In Vitro Corrosion Resistance and Mechanical Properties of Ag-SiO2-TiO2 Coatings Electrophoretically Deposited on NiTi Alloy. Coatings, 15(10), 1176. https://doi.org/10.3390/coatings15101176

Vancouver

Łosiewicz B, Kubisztal J, Barylski A, Dudek K. In Vitro Corrosion Resistance and Mechanical Properties of Ag-SiO2-TiO2 Coatings Electrophoretically Deposited on NiTi Alloy. Coatings. 2025;15(10):1176. doi:10.3390/coatings15101176

BibTeX
@article{osiewicz2025,
  author = {Łosiewicz, Bożena and Kubisztal, Julian and Barylski, Adrian and Dudek, Karolina},
  title = {In Vitro Corrosion Resistance and Mechanical Properties of Ag-SiO2-TiO2 Coatings Electrophoretically Deposited on NiTi Alloy},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {10},
  pages = {1176},
  doi = {10.3390/coatings15101176}
}
Kostenlos starten →