Bonding Strength and Its Enhancing Mechanism of CuCr/In718 Dissimilar Materials with Mortise and Tenon Structure Interface Manufactured by Laser-Based Direct Energy Deposition (DED-LB) Using Powder Feedstock
Metals · 19.05.2025 · 15 (5) · 557
DOI: 10.3390/met15050557 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 19.05.2025. Verfasst von Gang Xu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation.
Abstract (Originalsprache)
The interface bonding strength is challenging for CuCr and In718 dissimilar alloys fabricated by Laser-Based Direct Energy Deposition (DED-LB) using Powder Feedstock. Here, direct-bonded CuCr/In718 dissimilar materials (DMs) (direct-bonded specimen) and CuCr/In718 DMs with mortise and tenon structure interface (mortise-tenon specimen) were deposited by powder DED-LB. Owing to the alternating inter-track and inter-layer remelting, the defects were avoided, and the Cu elemental diffusion was obvious in the mortise-tenon specimen. Thereby, the better metallurgical bonding strength was achieved in the mortise-tenon specimen. The sandwich-shaped microstructure, including fine equiaxed and columnar grains, and the heterogeneous microstructure consisting of large columnar, short columnar, and fine equiaxed grains were formed in direct-bonded and mortise-tenon specimens, respectively. The formation mechanisms of these microstructures were unveiled, respectively. Besides, the shear strength of direct-bonded and mortise-tenon specimens was investigated. Owing to the mortise and tenon structure, the ultimate shear strength (USS) was increased by 47.18%. The synergistic enhancing mechanism of macroscopic interfacial morphology, microstructure, and elemental distribution on shear strength was revealed.
Förderung
- China Postdoctoral Science Foundation
Zitieren
APA
Xu, G., & Zhang, H. (2025). Bonding Strength and Its Enhancing Mechanism of CuCr/In718 Dissimilar Materials with Mortise and Tenon Structure Interface Manufactured by Laser-Based Direct Energy Deposition (DED-LB) Using Powder Feedstock. Metals, 15(5), 557. https://doi.org/10.3390/met15050557
Vancouver
Xu G, Zhang H. Bonding Strength and Its Enhancing Mechanism of CuCr/In718 Dissimilar Materials with Mortise and Tenon Structure Interface Manufactured by Laser-Based Direct Energy Deposition (DED-LB) Using Powder Feedstock. Metals. 2025;15(5):557. doi:10.3390/met15050557
BibTeX
@article{Xu2025,
author = {Xu, Gang and Zhang, Hongmei},
title = {Bonding Strength and Its Enhancing Mechanism of CuCr/In718 Dissimilar Materials with Mortise and Tenon Structure Interface Manufactured by Laser-Based Direct Energy Deposition (DED-LB) Using Powder Feedstock},
journal = {Metals},
year = {2025},
volume = {15},
number = {5},
pages = {557},
doi = {10.3390/met15050557}
}
EUVIMED