EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Quality and Compressive Properties of Mortise and Tenon Lattice Structures Fabricated by Fused Deposition Modeling

Bin Li iD, Byung-Won Min, Hai Gu, Jie Jiang, Jie Zhang, Hao Zhang

Materials · 30.01.2025 · 18 (3) · 628

DOI: 10.3390/ma18030628 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.01.2025. Verfasst von Bin Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Nantong Institute of Technology, Nantong 226002, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Project of Nantong, Natural Science Foundation of the Jiangsu Higher Education Institutions of China, Jiangsu Province Higher Education Excellent Science and Technology Innovation Team Laser Processing and Metal Additive Manufacturing Technology and Application.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the anisotropy of mechanical properties and the challenge of removing support materials in lattice structures fabricated using fused deposition modeling (FDM), this study is inspired by traditional woodworking mortise and tenon joints. A hexagonal interlocking mortise lattice structure was designed, and mortise and tenon lattice structures (MTLSs) with various parameters were fabricated. Compared with the traditional integrated forming lattice structure (IFLS), the MTLS exhibits maximum reductions in side surface roughness (Ra), printing time, and material consumption of 74.87%, 25.55%, and 52.21%, respectively. In addition to enhancing surface quality and printing efficiency, the MTLS also exhibited superior mechanical properties. The uniaxial compression test results show that the specific strength, energy absorption (EA), and specific energy absorption (SEA) of the MTLS exhibit maximum increases of 51.22%, 894.59%, and 888.39%, respectively, compared with the IFLS. Moreover, the effects of strut angle and thickness on the lattice structure were analyzed. Smaller strut angles and larger strut thicknesses endowed greater strength, while smaller angles contributed to higher energy absorption. This study proposes a novel approach for designing lattice structures in additive manufacturing.

Schlagwörter

Stichwörter der Autor:innen

compressive propertiesfused deposition modelinglattice structuremortise and tenonsurface quality

Autor:innen und Institutionen

  • School of Mechanical Engineering, Nantong Institute of Technology, Nantong 226002, China.
  • Jiangsu Key Laboratory of 3D Printing Equipment and Application Technology, Nantong Institute of Technology, Nantong 226002, China.
  • Division of Information and Communication Convergence Engineering, Mokwon University, Daejeon 35349, Republic of Korea.

ORCID-Profile: Bin Li

Förderung

  • Science and Technology Project of Nantong
  • Natural Science Foundation of the Jiangsu Higher Education Institutions of China
  • Jiangsu Province Higher Education Excellent Science and Technology Innovation Team Laser Processing and Metal Additive Manufacturing Technology and Application
  • Priority Discipline Construction Program of Jiangsu Province
  • Key Laboratory of Laser Processing and Metal Additive of the provincial science and technology service platform cultivation project of Nantong Institute of Tec…

Zitieren

APA

Li, B., Min, B. W., Gu, H., Jiang, J., Zhang, J., & Zhang, H. (2025). Surface Quality and Compressive Properties of Mortise and Tenon Lattice Structures Fabricated by Fused Deposition Modeling. Materials, 18(3), 628. https://doi.org/10.3390/ma18030628

Vancouver

Li B, Min BW, Gu H, Jiang J, Zhang J, Zhang H. Surface Quality and Compressive Properties of Mortise and Tenon Lattice Structures Fabricated by Fused Deposition Modeling. Materials. 2025;18(3):628. doi:10.3390/ma18030628

BibTeX
@article{Li2025,
  author = {Li, Bin and Min, Byung-Won and Gu, Hai and Jiang, Jie and Zhang, Jie and Zhang, Hao},
  title = {Surface Quality and Compressive Properties of Mortise and Tenon Lattice Structures Fabricated by Fused Deposition Modeling},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {628},
  doi = {10.3390/ma18030628}
}
Kostenlos starten →