Advanced powder flow regulation in DED-LB/P and EHLA3D via a novel nozzle-integrated fluidic powder switching mechanism
Journal of Laser Applications · 01.08.2026 · 38 (3)
DOI: 10.2351/7.0001871 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 15.06.2026. Verfasst von Viktor Glushych und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
In this work, a novel fluidic powder switch is developed, featuring an innovative design that enables near-instantaneous switching of a powder flow. Unlike conventional solutions, the fluid-based mechanism eliminates the need for mechanical switching elements in the powder conveying line, reducing system wear and enabling direct integration into a Laser Material Deposition (LMD or DED-LB/P) nozzle. The present work focuses on the evaluation and systematic assessment of the main functionality of toggling of a focused powder gas jet by analyzing switching times, delays caused by system inertia, and the stability and repeatability of the switching process. Measurements in a dedicated experimental setup show that a stable powder flow is consistently achieved within <200 ms, while powder deactivation occurs within <40 ms, highlighting the system's responsiveness and suitability for highly dynamic LMD and extreme high-speed laser material deposition processes. A high repeatability was demonstrated with rapid switching trials showing a standard deviation of as low as 1.74 and 24.1 ms between switching cycles for “time to powder on” and “time to stable powder flow,” respectively. In direct comparison with a commercially available mechanical powder switching system, the fluidic solution presented in this work demonstrated an improvement in responsiveness of approximately 83% under identical test conditions.
Zitieren
APA
Glushych, V., Zimmermann, M., Ko, M., & Schopphoven, T. (2026). Advanced powder flow regulation in DED-LB/P and EHLA3D via a novel nozzle-integrated fluidic powder switching mechanism. Journal of Laser Applications, 38(3). https://doi.org/10.2351/7.0001871
Vancouver
Glushych V, Zimmermann M, Ko M, Schopphoven T. Advanced powder flow regulation in DED-LB/P and EHLA3D via a novel nozzle-integrated fluidic powder switching mechanism. Journal of Laser Applications. 2026;38(3). doi:10.2351/7.0001871
BibTeX
@article{Glushych2026,
author = {Glushych, Viktor and Zimmermann, Max and Ko, Min-Uh and Schopphoven, Thomas},
title = {Advanced powder flow regulation in DED-LB/P and EHLA3D via a novel nozzle-integrated fluidic powder switching mechanism},
journal = {Journal of Laser Applications},
year = {2026},
volume = {38},
number = {3},
doi = {10.2351/7.0001871}
}
EUVIMED