EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Tensile Property Tailoring of Al–5Mg (wt%) Alloy Combined with Continuous Rheo-Extrusion and Sc Modification

Bowei Yang, Wenyue Liu, Xin Liu, Dalong Yang, Minqiang Gao

Metals · 10.01.2025 · 15 (1) · 54

DOI: 10.3390/met15010054 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 10.01.2025. Verfasst von Bowei Yang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Liaoning Province, Open Research Fund of Songshan Lake Materials Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, Al–Mg alloys fabricated by combining continuous rheo-extrusion (CRE) and Sc modification were proposed for producing Al–Mg alloys with high efficiency and superior mechanical performance. The microstructural evolution and mechanical property response of the CREed Al–5Mg alloy with Sc modification were investigated. The grain refinement and strengthening mechanisms induced by nanoscale Al3Sc-phase particles in the alloy were discussed. The results showed that an obvious grain refinement effect was achieved in the CREed Al–5Mg alloy as the Sc content increased from 0 to 0.5 wt%, and the average grain size decreased from 52.6 μm to 2.4 μm, respectively. The primary Al3Sc-phase particles formed during solidification behaved as heterogeneous nucleation sites for the α-Al matrix, while the nanoscale Al3Sc-phase particles achieved during CRE enhanced the driving force of continuous dynamic recrystallization and the Zener drag force. As a result, a superior grain refinement effect was observed. The ultimate tensile strength, yield strength, and hardness of the alloy were enhanced as the Sc content increased from 0 to 0.5 wt%. Grain boundary strengthening, second-phase strengthening, and dislocation strengthening were the main strengthening mechanisms of the CREed Al–Mg–Sc alloys.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Liaoning Province
  • Open Research Fund of Songshan Lake Materials Laboratory

Zitieren

APA

Yang, B., Liu, W., Liu, X., Yang, D., & Gao, M. (2025). Microstructure and Tensile Property Tailoring of Al–5Mg (wt%) Alloy Combined with Continuous Rheo-Extrusion and Sc Modification. Metals, 15(1), 54. https://doi.org/10.3390/met15010054

Vancouver

Yang B, Liu W, Liu X, Yang D, Gao M. Microstructure and Tensile Property Tailoring of Al–5Mg (wt%) Alloy Combined with Continuous Rheo-Extrusion and Sc Modification. Metals. 2025;15(1):54. doi:10.3390/met15010054

BibTeX
@article{Yang2025,
  author = {Yang, Bowei and Liu, Wenyue and Liu, Xin and Yang, Dalong and Gao, Minqiang},
  title = {Microstructure and Tensile Property Tailoring of Al–5Mg (wt%) Alloy Combined with Continuous Rheo-Extrusion and Sc Modification},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {1},
  pages = {54},
  doi = {10.3390/met15010054}
}
Kostenlos starten →