Use of Electrochemical Noise for the Study of Corrosion by Passivated CUSTOM 450 and AM 350 Stainless Steels
Metals · 16.03.2024 · 14 (3) · 341
DOI: 10.3390/met14030341 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 16.03.2024. Verfasst von Facundo Almeraya-Calderon und 10 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 112 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Precipitation-hardening stainless steels, like AM 350 and Custom 450, are extensively utilized in various aerospace applications. The latter steel is utilized for applications needing great strength and corrosion resistance. In contrast, the former steel has a good corrosion resistance and moderate strength. The purpose of this study was to analyze transient frequencies in the electrochemical noise of Custom 450 and AM 350 stainless steels that had been passivated for 60 and 90 min at 25 and 49 °C using baths of citric and nitric acid and then immersed in solutions containing 1% sulfuric acid (H2SO4) and 5% sodium chloride (NaCl). The potentiodynamic polychromatic curves employed electrochemical techniques and noise (EN) based on the ASTM-G5 and G199 standards. Two methods of data analysis were applied concerning EN: the domain of frequencies (power spectral density, PSD) and the time–frequency domain (Hilbert-Huang Transform). The PHSS passivated in citric acid indicated current densities in the H2SO4 solution between 10−2 and 10−3 mA/cm2, while those in the NaCl solution were recorded around 10−4 and 10−5 mA/cm2. The citric acid functions as a passivating agent. The results of the electrochemical noise analysis show that the PHSS passivated in nitric acid displayed a greater corrosion resistance. Moreover, there is a tendency for PHSS to be passivated in nitric acid to corrode locally.
Zitieren
APA
Almeraya-Calderon, F., Villegas-Tovar, M., Maldonado-Bandala, E., Lara-Banda, M., Baltazar-Zamora, M. A., Santiago-Hurtado, G., Nieves-Mendoza, D., Lopez-Leon, L. D., Jaquez-Muñoz, J. M., Estupiñán-López, F., & Gaona-Tiburcio, C. (2024). Use of Electrochemical Noise for the Study of Corrosion by Passivated CUSTOM 450 and AM 350 Stainless Steels. Metals, 14(3), 341. https://doi.org/10.3390/met14030341
Vancouver
Almeraya-Calderon F, Villegas-Tovar M, Maldonado-Bandala E, Lara-Banda M, Baltazar-Zamora MA, Santiago-Hurtado G, et al. Use of Electrochemical Noise for the Study of Corrosion by Passivated CUSTOM 450 and AM 350 Stainless Steels. Metals. 2024;14(3):341. doi:10.3390/met14030341
BibTeX
@article{AlmerayaCalderon2024,
author = {Almeraya-Calderon, Facundo and Villegas-Tovar, Miguel and Maldonado-Bandala, Erick and Lara-Banda, Maria and Baltazar-Zamora, Miguel Angel and Santiago-Hurtado, Griselda and Nieves-Mendoza, Demetrio and Lopez-Leon, Luis Daimir and Jaquez-Muñoz, Jesus Manuel and Estupiñán-López, Francisco and Gaona-Tiburcio, Citlalli},
title = {Use of Electrochemical Noise for the Study of Corrosion by Passivated CUSTOM 450 and AM 350 Stainless Steels},
journal = {Metals},
year = {2024},
volume = {14},
number = {3},
pages = {341},
doi = {10.3390/met14030341}
}
EUVIMED