EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion Resistance of GMAW Duplex Stainless Steels Welds

Argelia Fabiola Miranda-Pérez, Bryan Ramiro Rodríguez-Vargas, Irene Calliari iD, Luca Pezzato iD

Materials · 23.02.2023 · 16 (5) · 1847

DOI: 10.3390/ma16051847 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.02.2023. Verfasst von Argelia Fabiola Miranda-Pérez und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Strategic Planning and Technology Management, Universidad Popular Autónoma del Estado de Puebla, 17 Sur, 901, Barrio de Santiago, Puebl…. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CONACyT Mexico.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The hydrocarbon industry constantly requires a better understanding of stainless-steel welding metallurgy. Despite the fact that gas metal arc welding (GMAW) is one of the most commonly employed welding processes in the petrochemical industry, the process is characterized by the presence of a high number of variables to control in order to obtain components that are dimensionally repeatable and satisfy the functional requirements. In particular, corrosion is still a phenomenon that highly affects the performance of the exposed materials, and special attention must be paid when welding is applied. In this study, the real operating conditions of petrochemical industry were reproduced through an accelerated test in a corrosion reactor at 70 °C for 600 h, exposing robotic GMAW samples free of defects with suitable geometry. The results show that, even if duplex stainless steels are characterized for being more corrosion resistant than other stainless steels, under these conditions it was possible to identify microstructural damage. In detail was found that the corrosion properties were strongly related to the heat input during welding and that the best corrosion properties can be obtained with the higher heat input.

Schlagwörter

Stichwörter der Autor:innen

corrosioncrackingduplex stainless steelspittingrobotic GMAW

Autor:innen und Institutionen

  • Department of Strategic Planning and Technology Management, Universidad Popular Autónoma del Estado de Puebla, 17 Sur, 901, Barrio de Santiago, Puebla 72410, Mexico.
  • Corporación Mexicana de Investigación en Materiales S.A. de C.V., Ciencia y Tecnología No. 790, Saltillo 400, Saltillo 25290, Mexico.
  • Department of Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia, Italy.
  • Department of Industrial Engineering (DII), University of Padua, Via Marzolo 9, 35131 Padua, Italy.

ORCID-Profile: Irene Calliari, Luca Pezzato

Förderung

  • CONACyT Mexico

Zitieren

APA

Miranda-Pérez, A. F., Rodríguez-Vargas, B. R., Calliari, I., & Pezzato, L. (2023). Corrosion Resistance of GMAW Duplex Stainless Steels Welds. Materials, 16(5), 1847. https://doi.org/10.3390/ma16051847

Vancouver

Miranda-Pérez AF, Rodríguez-Vargas BR, Calliari I, Pezzato L. Corrosion Resistance of GMAW Duplex Stainless Steels Welds. Materials. 2023;16(5):1847. doi:10.3390/ma16051847

BibTeX
@article{MirandaPrez2023,
  author = {Miranda-Pérez, Argelia Fabiola and Rodríguez-Vargas, Bryan Ramiro and Calliari, Irene and Pezzato, Luca},
  title = {Corrosion Resistance of GMAW Duplex Stainless Steels Welds},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {5},
  pages = {1847},
  doi = {10.3390/ma16051847}
}
Kostenlos starten →