EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Finite Element Method in L-PBF of Ti-6Al-4V: Influence of Laser Power and Scan Speed on Residual Stress and Part Distortion

Dina Palmeri, Gaetano Pollara, Roberto Licari, Fabrizio Micari

Metals · 19.11.2023 · 13 (11) · 1907

DOI: 10.3390/met13111907 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 19.11.2023. Verfasst von Dina Palmeri und 3 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion (L-PBF) is widely used in automotive, aerospace, and biomedical applications thanks to its ability to produce complex geometries. In spite of its advantages, parts produced with this technology can show distortion due to the residual stresses developed during the printing process. For this reason, numerical simulations can be used to predict thermal gradients and residual stresses that can result in part distortion. Thus, instead of performing experimental tests and using a trial and error approach, it is possible to use numerical simulation to save time and material. In this work, the effect of laser power and scan speed on residual stress and part distortion was analysed using a commercial finite element analysis (FEA) software DEFORM-3D™ with a layer-by-layer approach. Moreover, the accuracy of the numerical model with respect to process parameters and the utilised mesh was also studied. The results obtained from the numerical simulation were compared to the actual distortions to evaluate the accuracy of the FEM model. The predicted distortions using FEM analysis well fit the trend of the measured ones. The accuracy of the numerical model increases by considering a finer mesh.

Zitieren

APA

Palmeri, D., Pollara, G., Licari, R., & Micari, F. (2023). Finite Element Method in L-PBF of Ti-6Al-4V: Influence of Laser Power and Scan Speed on Residual Stress and Part Distortion. Metals, 13(11), 1907. https://doi.org/10.3390/met13111907

Vancouver

Palmeri D, Pollara G, Licari R, Micari F. Finite Element Method in L-PBF of Ti-6Al-4V: Influence of Laser Power and Scan Speed on Residual Stress and Part Distortion. Metals. 2023;13(11):1907. doi:10.3390/met13111907

BibTeX
@article{Palmeri2023,
  author = {Palmeri, Dina and Pollara, Gaetano and Licari, Roberto and Micari, Fabrizio},
  title = {Finite Element Method in L-PBF of Ti-6Al-4V: Influence of Laser Power and Scan Speed on Residual Stress and Part Distortion},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {11},
  pages = {1907},
  doi = {10.3390/met13111907}
}
Kostenlos starten →