Laser Power and Scan Speed Effects on Density, Surface Quality, and Mechanical Properties of PBF-LB/M Ti-6Al-4V
Crystals · 06.02.2026 · 16 (2) · 121
DOI: 10.3390/cryst16020121 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 06.02.2026. Verfasst von Alexandru Paraschiv und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Research, Innovation and Digitalization, CCCDI-UEFISCDI.
Abstract (Originalsprache)
This study investigates how laser power–scan speed combinations influence densification, surface quality, and mechanical performance of Ti-6Al-4V parts fabricated by Powder Bed Fusion–Laser Beam/Metal (PBF-LB/M) on a DMG MORI LASERTEC 30 SLM (2nd generation) system. A parametric matrix was explored by varying laser power (150–400 W) and scan speed (0.9–1.4 m·s−1) at constant layer thickness and hatch spacing, deliberately omitting contour exposure to isolate core scan effects. A stable processing window was identified (250–300 W; 0.9–1.0 m·s−1) corresponding to ~50–60 J·mm−3 volumetric energy density (VED) achieved at 99.5% with residual porosity of 0.1–0.3%. In this regime, as-built roughness measured Ra = 4–6 µm on top surfaces and Ra = 15–17 µm on side surfaces. Mechanical testing in the as-built showed ultimate tensile strength (UTS) = 1150–1180 MPa and offset yield strength (YS0.2) = 955–994 MPa, with elongation up to 6.7%. Hardness increased from 220 HV to 360 HV as densification improved. Notably, similar VED values derived from distinct power–speed combinations resulted in divergent outcomes, confirming that VED alone does not uniquely predict quality. Comparative benchmarks from the literature data highlight the performance achieved. The resulting process–property map provides a practical reference for parameter optimization, reproducibility evaluation, and transferability across platforms.
Förderung
- Ministry of Research, Innovation and Digitalization, CCCDI-UEFISCDI
Zitieren
APA
Paraschiv, A., Bibis, A., Stoica, R. C., Bucaciuc, S., Visan, C., & Branzoi, F. (2026). Laser Power and Scan Speed Effects on Density, Surface Quality, and Mechanical Properties of PBF-LB/M Ti-6Al-4V. Crystals, 16(2), 121. https://doi.org/10.3390/cryst16020121
Vancouver
Paraschiv A, Bibis A, Stoica RC, Bucaciuc S, Visan C, Branzoi F. Laser Power and Scan Speed Effects on Density, Surface Quality, and Mechanical Properties of PBF-LB/M Ti-6Al-4V. Crystals. 2026;16(2):121. doi:10.3390/cryst16020121
BibTeX
@article{Paraschiv2026,
author = {Paraschiv, Alexandru and Bibis, Adrian and Stoica, Romica Constantin and Bucaciuc, Sebastian-Gabriel and Visan, Claudiu and Branzoi, Florina},
title = {Laser Power and Scan Speed Effects on Density, Surface Quality, and Mechanical Properties of PBF-LB/M Ti-6Al-4V},
journal = {Crystals},
year = {2026},
volume = {16},
number = {2},
pages = {121},
doi = {10.3390/cryst16020121}
}
EUVIMED