EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Powder Particle Size Distributions on Mechanical Properties of Alloy 718 by Laser Powder Bed Fusion

Benjamin Thomas Stegman, Jack Lopez, William Jarosinski, Haiyan Wang, Xinghang Zhang

Metals · 01.08.2023 · 13 (8) · 1384

DOI: 10.3390/met13081384 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 01.08.2023. Verfasst von Benjamin Thomas Stegman und 4 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSF-DFG.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Currently, metallic powders for laser powder bed fusion (LPBF) primarily come in two commercially available powder size distributions (PSDs): 15+/45− for non-reactive powders and 15+/63− for reactive powders. These powders are generally produced via gas atomization processes that create highly spherical particles with a Gaussian PSD. Because of the standard deviation within a Gaussian distribution, only small portions of the total product are used for LPBF applications. This screening process makes the other particle sizes a waste product and, thus, increases processing costs. The non-reactive 718 powder was printed with both the typical PSD of 15+/45− and a wider bimodal experimental PSD. Compared to conventional 718, the 718 alloys with bimodal PSD shows less than a 0.2% difference in density, and insignificant change in mechanical behavior. Electron backscattered diffraction studies revealed that grain sizes and morphology were similar between the two sample sets, but bimodal 718 alloy has a slightly greater degree of large grains. The study suggests that particles with wide or bimodal size distributions show promise in producing equivalent high-quality products without sacrificing mechanical properties.

Förderung

  • NSF-DFG

Zitieren

APA

Stegman, B. T., Lopez, J., Jarosinski, W., Wang, H., & Zhang, X. (2023). The Influence of Powder Particle Size Distributions on Mechanical Properties of Alloy 718 by Laser Powder Bed Fusion. Metals, 13(8), 1384. https://doi.org/10.3390/met13081384

Vancouver

Stegman BT, Lopez J, Jarosinski W, Wang H, Zhang X. The Influence of Powder Particle Size Distributions on Mechanical Properties of Alloy 718 by Laser Powder Bed Fusion. Metals. 2023;13(8):1384. doi:10.3390/met13081384

BibTeX
@article{Stegman2023,
  author = {Stegman, Benjamin Thomas and Lopez, Jack and Jarosinski, William and Wang, Haiyan and Zhang, Xinghang},
  title = {The Influence of Powder Particle Size Distributions on Mechanical Properties of Alloy 718 by Laser Powder Bed Fusion},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {8},
  pages = {1384},
  doi = {10.3390/met13081384}
}
Kostenlos starten →