EUVIMEDEUVIMED entdecken
Crossref

Effect of Scanning Strategies on the Microstructure and Mechanical Properties of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion

Linqing Liu, Di Wang, Yongqiang Yang, Zhi Wang, Zeyu Qian, Shibiao Wu, Jinrong Tang, Changjun Han, Chaolin Tan

Advanced Engineering Materials · 2023-03 · 25 (5)

DOI: 10.1002/adem.202200492 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 09.06.2022. Verfasst von Linqing Liu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The scanning strategy is an essential factor that determines the thermal history and combination of melt tracks within parts in the laser powder bed fusion (LPBF) process, which can significantly influence the microstructure evolution, defect formation, and mechanical properties of parts. Herein, the effect of scanning strategies (i.e., Y‐scan, XY‐scan, Rot‐scan, and Island‐scan) on the microstructure and mechanical properties of Inconel 718 (IN718) parts manufactured by LPBF is investigated. The results show that different scanning strategies can lead to different morphologies of melt tracks, and the Rot‐scan is the most beneficial strategy for improving density of parts. Different scanning strategies change the direction of the temperature gradient within parts, resulting in different morphologies of grain growth. The tensile properties of samples built with four types of scanning strategies show superior mechanical properties compared with the cast. The ultimate tensile strength of samples manufactured by Y‐scan, XY‐scan, and Rot‐scan is equivalent to that of the wrought, while the ductility of them is higher than that of wrought. However, tensile properties of samples manufactured by island scanning are lowest due to defects (e.g., pores, spatters) at the overlap of islands.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, L., Wang, D., Yang, Y., Wang, Z., Qian, Z., Wu, S., Tang, J., Han, C., & Tan, C. (2023). Effect of Scanning Strategies on the Microstructure and Mechanical Properties of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion. Advanced Engineering Materials, 25(5). https://doi.org/10.1002/adem.202200492

Vancouver

Liu L, Wang D, Yang Y, Wang Z, Qian Z, Wu S, et al. Effect of Scanning Strategies on the Microstructure and Mechanical Properties of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion. Advanced Engineering Materials. 2023;25(5). doi:10.1002/adem.202200492

BibTeX
@article{Liu2023,
  author = {Liu, Linqing and Wang, Di and Yang, Yongqiang and Wang, Zhi and Qian, Zeyu and Wu, Shibiao and Tang, Jinrong and Han, Changjun and Tan, Chaolin},
  title = {Effect of Scanning Strategies on the Microstructure and Mechanical Properties of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion},
  journal = {Advanced Engineering Materials},
  year = {2023},
  volume = {25},
  number = {5},
  doi = {10.1002/adem.202200492}
}
Kostenlos starten →