EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructures and High-Temperature Mechanical Properties of Inconel 718 Superalloy Fabricated via Laser Powder Bed Fusion

Nan Li, Changshun Wang, Chenglin Li iD

Materials · 28.07.2024 · 17 (15) · 3735

DOI: 10.3390/ma17153735 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.07.2024. Verfasst von Nan Li und 2 weiteren Autor:innen. Beteiligte Einrichtung: AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Project of the Ministry of Science and Technology of China, AECC.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Inconel 718 superalloy demonstrates the potential to fabricate high-temperature components using additive manufacturing. However, additively manufactured Inconel 718 typically exhibits low strength, necessitating post-heat treatments for precipitate strengthening. This study investigated the microstructures and mechanical properties of the Inconel 718 superalloy fabricated via laser powder bed fusion. The room-temperature and high-temperature tensile properties of the Inconel 718 alloy samples following various post-heat treatments were evaluated. The results indicate that the as-built samples exhibited columnar grains with fine cell structures. Solution treatment resulted in δ phase formation and grain recrystallization. Subsequent double aging led to finely distributed nanoscale γ′ and γ″ particles. These nanoscale particles provided high strength at both room and high temperatures, resulting in a balanced strength and ductility comparable to the wrought counterpart. High-temperature nanoindentation analyses revealed that the double-aging samples exhibited very high hardness and low creep rates at 650 °C.

Schlagwörter

Stichwörter der Autor:innen

high-temperature nanoindentationhigh-temperature tensilelaser powder bed fusionsuperalloy

Autor:innen und Institutionen

  • AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China.
  • School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, China.

ORCID-Profile: Chenglin Li

Förderung

  • National Key Research and Development Project of the Ministry of Science and Technology of China
  • AECC

Zitieren

APA

Li, N., Wang, C., & Li, C. (2024). Microstructures and High-Temperature Mechanical Properties of Inconel 718 Superalloy Fabricated via Laser Powder Bed Fusion. Materials, 17(15), 3735. https://doi.org/10.3390/ma17153735

Vancouver

Li N, Wang C, Li C. Microstructures and High-Temperature Mechanical Properties of Inconel 718 Superalloy Fabricated via Laser Powder Bed Fusion. Materials. 2024;17(15):3735. doi:10.3390/ma17153735

BibTeX
@article{Li2024,
  author = {Li, Nan and Wang, Changshun and Li, Chenglin},
  title = {Microstructures and High-Temperature Mechanical Properties of Inconel 718 Superalloy Fabricated via Laser Powder Bed Fusion},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {15},
  pages = {3735},
  doi = {10.3390/ma17153735}
}
Kostenlos starten →