Influence of Gravitational Orientation on the Formation of Electrodeposited Copper Wicks
Materials · 28.10.2026 · 19 (21) · 4539
DOI: 10.3390/ma19214539 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.10.2026. Verfasst von Oliver Skura und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Ship Technology, Institute of Energy, Gdańsk University of Technology, Narutowicza St. 11/12, 80-233 Gdańsk, Po…. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gdańsk University of Technology, National Science Centre, Polish National Science Centre.
Abstract (Originalsprache)
Porous wicks ensure capillary liquid transport in heat pipes and vapour chambers. Manufacturing them through electrochemical deposition is a promising method that yields competitive results. The gravitational orientation during electrochemical deposition, however, has rarely been taken into consideration. In this study, the effect of deposition orientation relative to gravity on the capillary performance of electrodeposited copper wicks was investigated. In total, 24 samples were prepared in three configurations defined by the angle between the cathode surface normal and gravitational acceleration: Top (22.8°, downward-facing), Vertical (90°, sideways-facing), and Bottom (157.2°, upward-facing). All other electrodeposition conditions were kept identical. Capillary performance was evaluated for 5 samples per configuration using a capillary lift rate test. The Top configuration achieved up to 44.8% greater mean capillary lift height than the Bottom configuration after 5 s. The Bottom and Vertical configurations exhibited similar capillary rise behaviour, whereas Top samples reached 15 mm in 19.4 s, compared with 42.9 s and 41.4 s for the Bottom and Vertical configurations, respectively. These results suggest that gravitational orientation affects the capillary performance of electrodeposited copper wicks and should be considered during their fabrication.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering and Ship Technology, Institute of Energy, Gdańsk University of Technology, Narutowicza St. 11/12, 80-233 Gdańsk, Poland.
ORCID-Profile: Oliver Skura, Mateusz Boćko, Pawel Szymanski
Förderung
- Gdańsk University of Technology
- National Science Centre
- Polish National Science Centre
Zitieren
APA
Skura, O., Boćko, M., & Szymanski, P. (2026). Influence of Gravitational Orientation on the Formation of Electrodeposited Copper Wicks. Materials, 19(21), 4539. https://doi.org/10.3390/ma19214539
Vancouver
Skura O, Boćko M, Szymanski P. Influence of Gravitational Orientation on the Formation of Electrodeposited Copper Wicks. Materials. 2026;19(21):4539. doi:10.3390/ma19214539
BibTeX
@article{Skura2026,
author = {Skura, Oliver and Boćko, Mateusz and Szymanski, Pawel},
title = {Influence of Gravitational Orientation on the Formation of Electrodeposited Copper Wicks},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4539},
doi = {10.3390/ma19214539}
}
EUVIMED