EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Influence of Deposition Potential on Electrodeposited Bismuth–Copper Oxide Electrodes for Asymmetric Supercapacitor

Rushikesh G. Bobade, Niteen B. Dabke, Shoyebmohamad F. Shaikh, Abdullah M. Al‐Enizi, Bidhan Pandit, Balkrishna J. Lokhande, Revanappa C. Ambare

Batteries & Supercaps · 2024-06 · 7 (6)

DOI: 10.1002/batt.202400163 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries & Supercaps, online erschienen am 24.04.2024. Verfasst von Rushikesh G. Bobade und 6 weiteren Autor:innen. Die Arbeit wurde bisher 75-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: King Saud University, Universidad Carlos III de Madrid.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The modern research reported the simplest low–cost synthesis of Bismuth–Copper oxide (Bi 2 CuO 4 ) with spruce–leaf–like morphology and its applications in supercapacitor devices. Bi (NO 3 ) 3 . 5H 2 O was used as a precursor during an electrodeposition (ED) method to create the spruce–leaf–like Bi 2 CuO 4 electrode. XRD, XPS, FE−SEM, EDX, and TEM were used to characterize the structures and morphologies of the synthesized materials, while CV, CP, and EIS were used to determine their electrochemical characteristics. The Bi 2 CuO 4 phase was confirmed by XRD patterns, and electrochemical testing demonstrated that the material had better rate capability and an SC of 431.2 F/g at a scan rate of 2 mV/s. After 5,000 cycles, it retained 81.4 % of its energy. Additionally, the maximum SC that was attained by the created asymmetric solid–state device ASSD (Bi 0.6 V ǀǀ1 M PVA−KOHǀǀAC) was 73.7 F/g. The energy density was 55.3 Wh/Kg at a power density of 4570 W/Kg. The exceptional electrochemical performance of Bi 2 CuO 4 thin film electrodes recommends it has a promising material.

Förderung

  • King Saud University
  • Universidad Carlos III de Madrid

Zitieren

APA

Bobade, R. G., Dabke, N. B., Shaikh, S. F., Al‐Enizi, A. M., Pandit, B., Lokhande, B. J., & Ambare, R. C. (2024). Influence of Deposition Potential on Electrodeposited Bismuth–Copper Oxide Electrodes for Asymmetric Supercapacitor. Batteries & Supercaps, 7(6). https://doi.org/10.1002/batt.202400163

Vancouver

Bobade RG, Dabke NB, Shaikh SF, Al‐Enizi AM, Pandit B, Lokhande BJ, et al. Influence of Deposition Potential on Electrodeposited Bismuth–Copper Oxide Electrodes for Asymmetric Supercapacitor. Batteries & Supercaps. 2024;7(6). doi:10.1002/batt.202400163

BibTeX
@article{Bobade2024,
  author = {Bobade, Rushikesh G. and Dabke, Niteen B. and Shaikh, Shoyebmohamad F. and Al‐Enizi, Abdullah M. and Pandit, Bidhan and Lokhande, Balkrishna J. and Ambare, Revanappa C.},
  title = {Influence of Deposition Potential on Electrodeposited Bismuth–Copper Oxide Electrodes for Asymmetric Supercapacitor},
  journal = {Batteries & Supercaps},
  year = {2024},
  volume = {7},
  number = {6},
  doi = {10.1002/batt.202400163}
}
Kostenlos starten →