EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Effect of Heat Treatment on Hydrogen Embrittlement of Electrodeposited Copper

Hamidreza M. Shirazi, Taegen M. Poles, Fei Long, Kevin Daub, Jason D. Giallonardo, Peter G. Keech, Desmond C. Williams, Roger C. Newman, Suraj Y. Persaud, Mark R. Daymond

Materials and Corrosion · 03.11.2026

DOI: 10.1002/maco.70295 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials and Corrosion, online erschienen am 03.11.2026. Verfasst von Hamidreza M. Shirazi und 9 weiteren Autor:innen. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Nuclear Waste Management Organization, Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present work investigates the tensile behavior of a copper coating electrodeposited onto steel that had been prepared in an acid bath after heat treatment. The copper is brittle at slow strain rates (1 × 10 −6 s −1 ) but ductile at fast strain rates (1 × 10 −3 s −1 ). A uniform distribution of tiny cavities is observed throughout the material after electrodeposition. Microstructural and chemical composition characterizations demonstrate that annealing the electrodeposited copper at 600°C increases grain size and transitions the morphology adjacent to the copper‐steel deposition interface from lamellar to equiaxed. Approximately 32% of the initial 17.8 ± 4.0 wppm hydrogen content is released by the 600°C annealing. Nano‐analysis of annealed samples shows the redistribution and the coalescence of cavities at grain boundaries, twins, and dislocations. Slow strain rate (1 × 10 −6 s −1 ) tensile tests of 600°C annealed samples still show a significant strain rate sensitivity, similar to the non‐heat‐treated material, and only a small improvement in ductility. Redistribution of solute hydrogen atoms on dislocations during annealing is hypothesized to be the reason behind this phenomenon.

Förderung

  • Nuclear Waste Management Organization
  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Shirazi, H. M., Poles, T. M., Long, F., Daub, K., Giallonardo, J. D., Keech, P. G., Williams, D. C., Newman, R. C., Persaud, S. Y., & Daymond, M. R. (2026). Effect of Heat Treatment on Hydrogen Embrittlement of Electrodeposited Copper. Materials and Corrosion. https://doi.org/10.1002/maco.70295

Vancouver

Shirazi HM, Poles TM, Long F, Daub K, Giallonardo JD, Keech PG, et al. Effect of Heat Treatment on Hydrogen Embrittlement of Electrodeposited Copper. Materials and Corrosion. 2026. doi:10.1002/maco.70295

BibTeX
@article{Shirazi2026,
  author = {Shirazi, Hamidreza M. and Poles, Taegen M. and Long, Fei and Daub, Kevin and Giallonardo, Jason D. and Keech, Peter G. and Williams, Desmond C. and Newman, Roger C. and Persaud, Suraj Y. and Daymond, Mark R.},
  title = {Effect of Heat Treatment on Hydrogen Embrittlement of Electrodeposited Copper},
  journal = {Materials and Corrosion},
  year = {2026},
  doi = {10.1002/maco.70295}
}
Kostenlos starten →