EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Austempering on the Microstructure, Mechanical Properties and Tribological Performance of EN-GJS-800-8 Ductile Iron Castings

Jarosław Jaroszek, Edward Miko iD, Łukasz Nowakowski, Artur Zaczyński iD

Materials · 17.08.2026 · 19 (16) · 3472

DOI: 10.3390/ma19163472 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.08.2026. Verfasst von Jarosław Jaroszek und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechatronics and Machine Design, Kielce University of Technology, Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education, Polish Ministry of Science and Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluated the effect of austempering on the microstructure, mechanical properties, and dry-sliding wear performance of EN-GJS-800-8 ductile iron produced as cross-step castings with wall thicknesses of 8, 17, 38, and 48 mm. As-cast and heat-treated specimens were examined by optical microscopy and quantitative image analysis, Brinell hardness, tensile and Charpy impact testing, ball-on-disk testing, and three-dimensional confocal profilometry. Austenitization at 880–890 °C for 2.5 h followed by austempering at 370–380 °C for 2 h produced an optically homogeneous acicular matrix consistent with ausferrite in all investigated sections and reduced the wall-thickness-related variation in hardness. The average hardness reached 296.4 HBW, the ultimate tensile strength 935 MPa, and elongation 8.6%. The mean Charpy impact energy increased from 5.12 to 10.06 J. The wear-track cross-sectional area decreased from approximately 2.98 × 104 to 210 μm2, while the maximum track depth decreased from 43.5 to 3 μm. The selected heat-treatment cycle therefore improved strength, impact-energy absorption, and wear resistance while promoting a more uniform response across the casting sections.

Schlagwörter

Stichwörter der Autor:innen

EN-GJS-800-8ausferritic matrixaustempered ductile iron (ADI)austemperingmechanical propertiesquantitative metallographytribologywear resistance

Autor:innen und Institutionen

  • Faculty of Mechatronics and Machine Design, Kielce University of Technology, Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland.
  • Odlewnie Polskie S.A., Inżyniera Władysława Rogowskiego 22, 27-200 Starachowice, Poland.

ORCID-Profile: Edward Miko, Artur Zaczyński

Förderung

  • Ministry of Science and Higher Education
  • Polish Ministry of Science and Higher Education

Zitieren

APA

Jaroszek, J., Miko, E., Nowakowski, Ł., & Zaczyński, A. (2026). Effect of Austempering on the Microstructure, Mechanical Properties and Tribological Performance of EN-GJS-800-8 Ductile Iron Castings. Materials, 19(16), 3472. https://doi.org/10.3390/ma19163472

Vancouver

Jaroszek J, Miko E, Nowakowski Ł, Zaczyński A. Effect of Austempering on the Microstructure, Mechanical Properties and Tribological Performance of EN-GJS-800-8 Ductile Iron Castings. Materials. 2026;19(16):3472. doi:10.3390/ma19163472

BibTeX
@article{Jaroszek2026,
  author = {Jaroszek, Jarosław and Miko, Edward and Nowakowski, Łukasz and Zaczyński, Artur},
  title = {Effect of Austempering on the Microstructure, Mechanical Properties and Tribological Performance of EN-GJS-800-8 Ductile Iron Castings},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {16},
  pages = {3472},
  doi = {10.3390/ma19163472}
}
Kostenlos starten →