EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fatigue Properties of Heavy Section GJS-600-10 Cast Iron Castings

Ari Mourujärvi, Joona Vaara, Jarkko Laine, Oskari Ryti, Kalle Jalava, Juhani Orkas

International Journal of Metalcasting · 16.03.2026

DOI: 10.1007/s40962-026-01919-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Metalcasting, online erschienen am 16.03.2026. Verfasst von Ari Mourujärvi und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Aalto University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the fatigue properties of heavy section solution strengthened ferritic spheroidal cast iron (SSF-DI) EN-GJS-600-10 castings in three different section sizes. A silicon content of 4.0% was used. To estimate the influence of the size of solidification microshrinkage cavities, graphite nodules, and graphite nodule clusters on the fatigue strength of the investigated iron grade, scanning electron microscope inspections of the fracture surfaces and extreme value analysis of the crack initiating defect size, $$\sqrt{\text{area}}$$ area , were made. The results show that the Murakami–Endo $$\sqrt{\text{area}}$$ area - parameter model adequately predicts the fatigue limit of heavy section EN-GJS-600-10 castings. Moreover, surface defects with a size between 144 and 1599 µm behaved as a short crack, and no critical size for a long crack could be observed. Finally, microshrinkage cavities were the most detrimental defects on the fracture surfaces that influenced the fatigue limit.

Förderung

  • Aalto University

Zitieren

APA

Mourujärvi, A., Vaara, J., Laine, J., Ryti, O., Jalava, K., & Orkas, J. (2026). Fatigue Properties of Heavy Section GJS-600-10 Cast Iron Castings. International Journal of Metalcasting. https://doi.org/10.1007/s40962-026-01919-1

Vancouver

Mourujärvi A, Vaara J, Laine J, Ryti O, Jalava K, Orkas J. Fatigue Properties of Heavy Section GJS-600-10 Cast Iron Castings. International Journal of Metalcasting. 2026. doi:10.1007/s40962-026-01919-1

BibTeX
@article{Mourujrvi2026,
  author = {Mourujärvi, Ari and Vaara, Joona and Laine, Jarkko and Ryti, Oskari and Jalava, Kalle and Orkas, Juhani},
  title = {Fatigue Properties of Heavy Section GJS-600-10 Cast Iron Castings},
  journal = {International Journal of Metalcasting},
  year = {2026},
  doi = {10.1007/s40962-026-01919-1}
}
Kostenlos starten →