EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties and Microscopic Mechanism of Shield Tunnel Spoil Stabilized with ESCA

Liandi Zhao, Henggen Zhang, Xiaoge Yu, Xujiayin Zhao, Jinwen Chen

Materials · 01.06.2026 · 19 (11) · 2345

DOI: 10.3390/ma19112345 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.06.2026. Verfasst von Liandi Zhao und 4 weiteren Autor:innen. Beteiligte Einrichtung: Shandong Key Laboratory of Technologies and Systems for Intelligent Construction Equipment, Shandong Jiaotong University, No. 5001 Haitang Road, Chan…. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shandong Natural Science Foundation of China, Joint Funds of the Shandong Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The efficient treatment and resource utilization of shield tunnel spoil (STS) are important for sustainable underground construction in China. To improve the early mechanical performance and microstructural compactness of stabilized STS, this study investigated the solidification effect of a novel early-strength cementitious agent (ESCA) and compared it with ordinary Portland cement (P.O 42.5). Macroscopic mechanical tests, including unconfined compressive strength (UCS), stress–strain behavior, mass, and P-wave velocity measurements, were combined with scanning electron microscopy (SEM) and computed tomography (CT) analyses to reveal the mechanical response and microstructural mechanisms of stabilized STS. The results indicate that, compared with P.O 42.5, ESCA exhibits superior fluidity at lower water-to-solid (w/s) ratios, significantly shorter setting times, and higher compressive strength at all curing ages. The solidification efficiency of ESCA for STS is notably superior to that of P.O 42.5, with the peak strength, elastic modulus, mass, and P-wave velocity of ESCA-solidified specimens being higher than those of P.O 42.5-solidified specimens across the five dosages. Furthermore, ESCA material bonds more tightly with STS particles, resulting in lower porosity and a denser microstructure under the same stabilizer dosage. Overall, the combination of macroscopic mechanical properties and microstructural characterization demonstrates that ESCA material exhibits significant advantages in the efficient solidification and resource utilization of shield tunnel spoil.

Schlagwörter

Stichwörter der Autor:innen

computed tomographyearly-strength cementitious agentmechanical propertiesmicrostructureshield tunnel spoilsolidification

Autor:innen und Institutionen

  • Shandong Key Laboratory of Technologies and Systems for Intelligent Construction Equipment, Shandong Jiaotong University, No. 5001 Haitang Road, Changqing District, Jinan 250357, China.
  • School of Transportation and Civil Engineering, Shandong Jiaotong University, Jinan 250357, China.
  • Shandong Engineering Research Center of Marine Exploration and Conservation, Ocean University of China, Qingdao 266100, China.
  • Shandong High-Speed Maintenance Industry Co., Ltd., Jinan 250014, China.

Förderung

  • National Natural Science Foundation of China
  • Shandong Natural Science Foundation of China
  • Joint Funds of the Shandong Natural Science Foundation of China

Zitieren

APA

Zhao, L., Zhang, H., Yu, X., Zhao, X., & Chen, J. (2026). Mechanical Properties and Microscopic Mechanism of Shield Tunnel Spoil Stabilized with ESCA. Materials, 19(11), 2345. https://doi.org/10.3390/ma19112345

Vancouver

Zhao L, Zhang H, Yu X, Zhao X, Chen J. Mechanical Properties and Microscopic Mechanism of Shield Tunnel Spoil Stabilized with ESCA. Materials. 2026;19(11):2345. doi:10.3390/ma19112345

BibTeX
@article{Zhao2026,
  author = {Zhao, Liandi and Zhang, Henggen and Yu, Xiaoge and Zhao, Xujiayin and Chen, Jinwen},
  title = {Mechanical Properties and Microscopic Mechanism of Shield Tunnel Spoil Stabilized with ESCA},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2345},
  doi = {10.3390/ma19112345}
}
Kostenlos starten →