Mechanical Properties and Damage Evolution of Shield Tunnel Spoil Solidified with Basalt Fiber-Reinforced Low-Carbon Cementitious Materials Under Drying–Wetting Cycles
Materials · 07.05.2026 · 19 (10) · 1920
DOI: 10.3390/ma19101920 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.05.2026. Verfasst von Yuhan Li und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Shandong University, Jinan 250002, China. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shandong Natural Science Foundation of China, Joint Funds of the Shandong Natural Science Foundation of China.
Abstract (Originalsprache)
This study aims to develop a green composite cementitious material (GCCM) by partially replacing cement with multiple industrial solid wastes and to further enhance its toughness by incorporating basalt fibers (BF) for the effective disposal of shield tunnel spoil (STS). The deterioration behavior of STS synergistically improved by GCCM and BF was systematically investigated under drying–wetting (D-W) cycles using unconfined compressive strength (UCS) tests, mass loss and P-wave velocity measurements, as well as industrial computed tomography (CT) and scanning electron microscopy (SEM). The results show that BF significantly improves the early-age strength and deformation toughness of STS, with an optimal UCS increase of about 13% at 0.45% BF. Although the mechanical properties of the specimens deteriorated with an increasing number of D-W cycles, the “bridging effect” of BF effectively inhibited the propagation and coalescence of cracks. Quantitative CT analysis further revealed that the addition of 1.00% BF reduced the pore volume (Vk) and crack volume (Vl) by 54.3% and 63.2%, respectively, after eight D-W cycles. The damage mechanism is primarily attributed to the loss of cementitious materials caused by water migration and the swelling–shrinkage stress of clay minerals. The three-dimensional (3D) network structure formed by BF, through its pull-out energy dissipation mechanism, effectively maintained the macro- and microstructural integrity of the material. This study highlights the novelty of combining GCCM with BF to enhance the long-term durability of STS, providing a theoretical basis and technical support for its green disposal and engineering application in complex environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Civil Engineering, Shandong University, Jinan 250002, China.
- Shandong Key Laboratory of Technologies and Systems for Intelligent Construction Equipment, Shandong Jiaotong University, Jinan 250357, China.
- School of Transportation and Civil Engineering, Shandong Jiaotong University, Jinan 250357, China.
- Shandong Engineering Research Center of Marine Exploration and Conservation, Ocean University of China, Qingdao 266100, China.
- Department of Civil, Environmental and Geomatic Engineering, University College London, London WC1E 6BT, UK.
Förderung
- National Natural Science Foundation of China
- Shandong Natural Science Foundation of China
- Joint Funds of the Shandong Natural Science Foundation of China
Zitieren
APA
Li, Y., Zhang, H., & Zhao, X. (2026). Mechanical Properties and Damage Evolution of Shield Tunnel Spoil Solidified with Basalt Fiber-Reinforced Low-Carbon Cementitious Materials Under Drying–Wetting Cycles. Materials, 19(10), 1920. https://doi.org/10.3390/ma19101920
Vancouver
Li Y, Zhang H, Zhao X. Mechanical Properties and Damage Evolution of Shield Tunnel Spoil Solidified with Basalt Fiber-Reinforced Low-Carbon Cementitious Materials Under Drying–Wetting Cycles. Materials. 2026;19(10):1920. doi:10.3390/ma19101920
BibTeX
@article{Li2026,
author = {Li, Yuhan and Zhang, Henggen and Zhao, Xujiayin},
title = {Mechanical Properties and Damage Evolution of Shield Tunnel Spoil Solidified with Basalt Fiber-Reinforced Low-Carbon Cementitious Materials Under Drying–Wetting Cycles},
journal = {Materials},
year = {2026},
volume = {19},
number = {10},
pages = {1920},
doi = {10.3390/ma19101920}
}
EUVIMED