EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reutilization of Silty Sandstone Shield Spoil for Sustainable Synchronous Grouting: Mechanical Properties and Microstructure Characterization

Changying Yu, Dong Yang, Shuishen Li, Yongfeng Wang, Changjie He, Yi Chen, Liangjie Zhan, Gongxun Wang iD

Materials · 16.02.2026 · 19 (4) · 778

DOI: 10.3390/ma19040778 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.02.2026. Verfasst von Changying Yu und 7 weiteren Autor:innen. Beteiligte Einrichtung: China Construction Fifth Engineering Division Co., Ltd., Changsha 410004, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hunan Provincial Natural Science Foundation of China, Scientific Research Fund of Hunan Provincial Education Department of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional synchronous grouting materials often exhibit low early strength, delayed setting, and insufficient utilization of excavated soil, hindering the green and efficient advancement of metro shield tunneling technology. To overcome these challenges, this study developed a high-performance grouting material by utilizing shield muck—primarily composed of quartz (71.47%) and calcite (15.3%)—as the main raw material, with sodium trimethylsilanolate (TMS-Na) introduced as a performance enhancer. Through orthogonal experiments and range analysis, the influences of cement content, slag content, and TMS-Na dosage on the workability and mechanical properties of synchronous grouting materials were systematically evaluated. Microstructural evolution was characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric (TG) analysis, and mercury intrusion porosimetry (MIP) to elucidate the mechanism by which TMS-Na modifies the grout microstructure. The results demonstrate that incorporating 8% slag and 0.2% TMS-Na increases the utilization rate of shield muck to 60.8%. Compared with conventional grouts, the novel material exhibits approximately 97.4% and 93.3% enhancements in 3-day and 28-day compressive strength, respectively, alongside an impermeability grade reaching P10. The addition of slag improves the apparent density and early strength of the grout, although its contribution diminishes at later ages. TMS-Na effectively activates the hydration reactivity of slag, accelerates early hydration, reduces the setting time, and participates in a secondary hydration reaction with argillaceous siltstone present in the excavated soil, promoting the formation of additional calcium silicate hydrate (C-S-H). This process densifies the hardened grout matrix, refines the pore structure, and significantly enhances both mechanical performance and impermeability. Field application in a trial tunnel section confirms that the proposed grouting material achieves complete cavity filling, eliminates water leakage, controls ground deformation effectively, and offers favorable economic viability, demonstrating strong potential for large-scale engineering application.

Schlagwörter

Stichwörter der Autor:innen

argillaceous siltstonehydrationpore structureshield mucksodium trimethylsilanolate

Autor:innen und Institutionen

  • China Construction Fifth Engineering Division Co., Ltd., Changsha 410004, China.
  • School of Civil Engineering, Hunan University of Science and Technology, Xiangtan 411201, China.
  • Hunan Province Intelligent Construction Assembly Passive House Engineering Technology Research Center, Xiangtan 411201, China.

ORCID-Profile: Gongxun Wang

Förderung

  • Hunan Provincial Natural Science Foundation of China
  • Scientific Research Fund of Hunan Provincial Education Department of China

Zitieren

APA

Yu, C., Yang, D., Li, S., Wang, Y., He, C., Chen, Y., Zhan, L., & Wang, G. (2026). Reutilization of Silty Sandstone Shield Spoil for Sustainable Synchronous Grouting: Mechanical Properties and Microstructure Characterization. Materials, 19(4), 778. https://doi.org/10.3390/ma19040778

Vancouver

Yu C, Yang D, Li S, Wang Y, He C, Chen Y, et al. Reutilization of Silty Sandstone Shield Spoil for Sustainable Synchronous Grouting: Mechanical Properties and Microstructure Characterization. Materials. 2026;19(4):778. doi:10.3390/ma19040778

BibTeX
@article{Yu2026,
  author = {Yu, Changying and Yang, Dong and Li, Shuishen and Wang, Yongfeng and He, Changjie and Chen, Yi and Zhan, Liangjie and Wang, Gongxun},
  title = {Reutilization of Silty Sandstone Shield Spoil for Sustainable Synchronous Grouting: Mechanical Properties and Microstructure Characterization},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {4},
  pages = {778},
  doi = {10.3390/ma19040778}
}
Kostenlos starten →