EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experiment and Modelling of Ultrasonic Vibration-Assisted Creep-Aging Tensile for 7055-T6 Alloy

Duquan Zuo iD, Haoran Fu, Tianyu Xu iD, Ti Ye, Yanjie Han, Chong Gao iD

Materials · 25.05.2026 · 19 (11) · 2223

DOI: 10.3390/ma19112223 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.05.2026. Verfasst von Duquan Zuo und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Aviation Engineering, Civil Aviation Flight University of China, 46, Nanchang Road, Guanghan 618307, China. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation, Fundamental Research Funds for the Central Universities, Chongqing Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of ultrasonic vibration on the creep-aging tensile behavior of 7055-T6 aluminum alloy through experiments and finite element simulations. Two characteristic parameters—effective softening amplitude (ESA) and recovery amplitude (RA)—are introduced to quantify the competing softening and hardening effects induced by ultrasonic vibration. Experimental results reveal that the maximum ESA (28.1 MPa) occurs at an amplitude of 14.01 μm, whereas optimal plasticity is achieved at 12.53 μm, indicating that maximum softening does not coincide with optimal formability. Intermittent vibration enhances creep plastic strain by up to 6.95% at 12.53 μm, contrasting with the detrimental effect of continuous vibration. A viscoplastic constitutive model incorporating the volumetric effect of ultrasonic vibration is developed and validated via finite element simulations, achieving close agreement with experiments (ESA deviation ≤ 1.9 MPa). These findings provide quantitative guidance for parameter optimization in ultrasonic-assisted creep-aging formation.

Schlagwörter

Stichwörter der Autor:innen

creep-aging tensilemechanical propertiesultrasonic vibrationvolume effect

Autor:innen und Institutionen

  • College of Aviation Engineering, Civil Aviation Flight University of China, 46, Nanchang Road, Guanghan 618307, China.
  • School of Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan.

ORCID-Profile: Duquan Zuo, Tianyu Xu, Chong Gao

Förderung

  • China Postdoctoral Science Foundation
  • Fundamental Research Funds for the Central Universities
  • Chongqing Natural Science Foundation
  • Sichuan Province Engineering Technology Research Center of General Aircraft Maintenance
  • Sichuan Science and Technology Program

Zitieren

APA

Zuo, D., Fu, H., Xu, T., Ye, T., Han, Y., & Gao, C. (2026). Experiment and Modelling of Ultrasonic Vibration-Assisted Creep-Aging Tensile for 7055-T6 Alloy. Materials, 19(11), 2223. https://doi.org/10.3390/ma19112223

Vancouver

Zuo D, Fu H, Xu T, Ye T, Han Y, Gao C. Experiment and Modelling of Ultrasonic Vibration-Assisted Creep-Aging Tensile for 7055-T6 Alloy. Materials. 2026;19(11):2223. doi:10.3390/ma19112223

BibTeX
@article{Zuo2026,
  author = {Zuo, Duquan and Fu, Haoran and Xu, Tianyu and Ye, Ti and Han, Yanjie and Gao, Chong},
  title = {Experiment and Modelling of Ultrasonic Vibration-Assisted Creep-Aging Tensile for 7055-T6 Alloy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2223},
  doi = {10.3390/ma19112223}
}
Kostenlos starten →