EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of the Ultrasonic-Assisted Casting of an AlSi7Mg Alloy on T6 Heat Treatment

Inês V. Gomes, José Grilo, Vitor H. Carneiro, Hélder Puga

Metals · 28.01.2023 · 13 (2) · 255

DOI: 10.3390/met13020255 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 28.01.2023. Verfasst von Inês V. Gomes und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund (ERDF), Fundação para a Ciência e a Tecnologia–FCT IPP national funds, Portuguese FCT.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, the effect of ultrasonic vibration during solidification on the aging kinetics of an AlSi7Mg alloy is investigated. With the ultrasonic equipment coupled to the mold walls, melt treatment was performed by two approaches: (i) fully above liquidus (>635 °C); and (ii) in the full range between liquidus and solidus (630 °C→ 550 °C). Cast samples were then subjected to T6 heat treatment for different aging times. It is shown that indirect ultrasound treatment increases the cooling rate while active. The eutectic Si was refined and further modified when ultrasound treatment was performed in the semisolid state. Due to the significant release of solute during the decomposition of π-Al8FeMg3Si6 into fine β-Al5FeSi, this has a significant impact in the solution stage. Ultrasound treatment fully above liquidus decreased the underaging time to 50% and peak aging time to 25% without compromising strength. The results suggest aging kinetics are correlated with a higher vacancy density and solute enrichment which favors Guinier–Preston (GP) zone formation. These findings show a promising route to tailor the aging kinetics in these alloys by selectively modifying phases and cooling rates.

Förderung

  • European Regional Development Fund (ERDF)
  • Fundação para a Ciência e a Tecnologia–FCT IPP national funds
  • Portuguese FCT

Zitieren

APA

Gomes, I. V., Grilo, J., Carneiro, V. H., & Puga, H. (2023). Impact of the Ultrasonic-Assisted Casting of an AlSi7Mg Alloy on T6 Heat Treatment. Metals, 13(2), 255. https://doi.org/10.3390/met13020255

Vancouver

Gomes IV, Grilo J, Carneiro VH, Puga H. Impact of the Ultrasonic-Assisted Casting of an AlSi7Mg Alloy on T6 Heat Treatment. Metals. 2023;13(2):255. doi:10.3390/met13020255

BibTeX
@article{Gomes2023,
  author = {Gomes, Inês V. and Grilo, José and Carneiro, Vitor H. and Puga, Hélder},
  title = {Impact of the Ultrasonic-Assisted Casting of an AlSi7Mg Alloy on T6 Heat Treatment},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {255},
  doi = {10.3390/met13020255}
}
Kostenlos starten →