Modeling and Experimental Investigation of Ultrasonic Vibration-Assisted Drilling Force for Titanium Alloy
Materials · 24.09.2025 · 18 (19) · 4460
DOI: 10.3390/ma18194460 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 24.09.2025. Verfasst von Chuanmiao Zhai und 8 weiteren Autor:innen. Beteiligte Einrichtung: Shaanxi Key Laboratory of Advanced Manufacturing and Evaluation of Robot Key Components, College of Mechanical Engineering, Baoji University of Arts …. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Natural Science Basic Research Program of Shaanxi Province of China, The Service Local Special Scientific Research Program Project of Education Department of Shaanxi Province of China, The Graduate Innovation Research Project of Baoji University of Arts and Sciences.
Abstract (Originalsprache)
To overcome the issues of excessive cutting force, poor chip segmentation, and premature tool wear during the drilling of Ti-6Al-4V titanium alloy. This study established the cutting edge motion trajectory function and instantaneous dynamic cutting thickness equation for ultrasonic vibration-assisted drilling through kinematic analysis. Based on this, an analytical model of drilling force was formulated, integrating tool geometry, cutting radius scale effects, dynamic chip thickness, and drilling depth. In parallel, a finite element model was constructed to achieve visual simulation analysis of chip deformation and cutting force. Finally, the accuracy of the model was verified through experiments, with a comprehensive analysis performed on how cutting parameters affect thrust force. The findings indicate that the average absolute prediction errors of thrust force and torque between the analytical model and finite element simulations were 7.87% and 6.26%, respectively, confirming the model’s capability to accurately capture instantaneous force and torque variations. Compared to traditional drilling methods, the application of ultrasonic vibration assistance resulted in reductions of 40.8% in thrust force and 41.7% in torque. The drilling force exhibited nonlinear growth as the spindle speed and feed rate were elevated, while it declined with greater vibration frequency and amplitude as drilling depth increased. Furthermore, the combined effect of optimized vibration parameters enhanced chip fragmentation, producing short discontinuous chips and effectively preventing entanglement. Overall, this research provides a theoretical and practical foundation for optimizing ultrasonic vibration-assisted drilling and improving precision hole making in titanium alloys.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Shaanxi Key Laboratory of Advanced Manufacturing and Evaluation of Robot Key Components, College of Mechanical Engineering, Baoji University of Arts and Sciences, Baoji 721016, China.
- Zhejiang Sankai Mechanical and Electrical Co., Ltd., Taizhou 317511, China.
- School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China.
ORCID-Profile: Xubo Li, Canjun Wang
Förderung
- The Natural Science Basic Research Program of Shaanxi Province of China
- The Service Local Special Scientific Research Program Project of Education Department of Shaanxi Province of China
- The Graduate Innovation Research Project of Baoji University of Arts and Sciences
- Natural Science Basic Research Program of Shaanxi Province of China
- Service Local Special Scientific Research Program Project of Education Department of Shaanxi Province of China
- Graduate Innovation Research Project of Baoji University of Arts and Sciences
Zitieren
APA
Zhai, C., Li, X., Zang, C., Zhang, S., Guo, B., Wang, C., Gao, X., Su, Y., & Liu, M. (2025). Modeling and Experimental Investigation of Ultrasonic Vibration-Assisted Drilling Force for Titanium Alloy. Materials, 18(19), 4460. https://doi.org/10.3390/ma18194460
Vancouver
Zhai C, Li X, Zang C, Zhang S, Guo B, Wang C, et al. Modeling and Experimental Investigation of Ultrasonic Vibration-Assisted Drilling Force for Titanium Alloy. Materials. 2025;18(19):4460. doi:10.3390/ma18194460
BibTeX
@article{Zhai2025,
author = {Zhai, Chuanmiao and Li, Xubo and Zang, Cunqiang and Zhang, Shihao and Guo, Bian and Wang, Canjun and Gao, Xiaolong and Su, Yuewen and Liu, Mengmeng},
title = {Modeling and Experimental Investigation of Ultrasonic Vibration-Assisted Drilling Force for Titanium Alloy},
journal = {Materials},
year = {2025},
volume = {18},
number = {19},
pages = {4460},
doi = {10.3390/ma18194460}
}
EUVIMED