EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Micro-Milling-Induced Residual Stress and Deformation in Titanium Alloy Thin-Walled Components and Multi-Objective Collaborative Optimization

Jie Yi iD, Rui Wang, Dengyun Du, Dong Han, Xinyao Wang, Junfeng Xiang iD

Materials · 06.01.2026 · 19 (2) · 219

DOI: 10.3390/ma19020219 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.01.2026. Verfasst von Jie Yi und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electronic Engineering, Shandong Jianzhu University, Jinan 250101, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Chongqing, Natural Science Foundation of Shandong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The intrinsically low stiffness of titanium alloy thin-walled components causes residual stresses to readily accumulate during high-speed micro-milling, leading to deformation and hindering machining precision. To clarify the residual-stress formation mechanism and enable deformation control, this study first proposes a surface residual stress characterization model based on an exponentially decaying sinusoidal function, with model parameters efficiently identified via an improved particle swarm optimization algorithm, allowing rapid characterization of stress distributions under different process conditions. A response surface model constructed using a central composite design is then employed to reveal the coupled effects of machining parameters on residual stress and top-surface deformation. On this basis, a GA-BP neural network–based prediction framework is developed to improve the accuracy of residual stress and deformation prediction, while the AGE-MOEA2 multi-objective evolutionary algorithm is used to optimize micro-milling parameters for the simultaneous minimization of residual stress and deformation via Pareto-optimal solutions. Validation experiments on thin-wall micro-milling confirm that the optimized parameters significantly reduce peak residual stress and suppress top-surface deformation. The proposed modeling and optimization strategy provides an effective reference for high-precision machining of titanium alloy thin-walled components.

Schlagwörter

Stichwörter der Autor:innen

GA-BP neural networkdeformation predictionmicro-millingmulti-objective optimizationresidual stress

Autor:innen und Institutionen

  • School of Mechanical and Electronic Engineering, Shandong Jianzhu University, Jinan 250101, China.
  • School of Technician Department, Shandong Labor Vocational and Technical College, Jinan 250300, China.
  • School of Civil Aviation, Northwestern Polytechnical University, Xi'an 710072, China.
  • Yangtze River Delta Research Institute of NPU, Suzhou 215400, China.
  • Innovation Center NPU Chongqing, Northwestern Polytechnical University, Chongqing 401135, China.

ORCID-Profile: Jie Yi, Junfeng Xiang

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Chongqing
  • Natural Science Foundation of Shandong Province
  • Basic Research Programs of Taicang

Zitieren

APA

Yi, J., Wang, R., Du, D., Han, D., Wang, X., & Xiang, J. (2026). Prediction of Micro-Milling-Induced Residual Stress and Deformation in Titanium Alloy Thin-Walled Components and Multi-Objective Collaborative Optimization. Materials, 19(2), 219. https://doi.org/10.3390/ma19020219

Vancouver

Yi J, Wang R, Du D, Han D, Wang X, Xiang J. Prediction of Micro-Milling-Induced Residual Stress and Deformation in Titanium Alloy Thin-Walled Components and Multi-Objective Collaborative Optimization. Materials. 2026;19(2):219. doi:10.3390/ma19020219

BibTeX
@article{Yi2026,
  author = {Yi, Jie and Wang, Rui and Du, Dengyun and Han, Dong and Wang, Xinyao and Xiang, Junfeng},
  title = {Prediction of Micro-Milling-Induced Residual Stress and Deformation in Titanium Alloy Thin-Walled Components and Multi-Objective Collaborative Optimization},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {2},
  pages = {219},
  doi = {10.3390/ma19020219}
}
Kostenlos starten →