EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Parameter Collaborative Optimization of Foamed Asphalt Cold Recycling Mixture Properties

Wei Qiu, Bin Li, Ziyi Song, Xiaoling Zou, Mingjun Hu, Yanqiu Bi

Materials · 18.05.2026 · 19 (10) · 2123

DOI: 10.3390/ma19102123 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.05.2026. Verfasst von Wei Qiu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Poly Changda Overseas Engineering Co., Ltd., No. 942, Middle of Guangzhou Avenue, Tianhe District, Guangzhou 510000, China. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, the Natural Science Foundation of Chongqing Municipality, Chongqing Municipality Education Commission.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examined the foaming characteristics of asphalt and their effects on the performance of cold recycled mixtures. The expansion ratio and half-life were used to evaluate effects of asphalt type, foaming temperature, and water content. The influence of asphalt content, gradation, cement content, curing time, and mixing water on mechanical properties and water stability was analyzed. The results indicate that asphalt type is the key factor affecting foaming performance. CNOOA asphalt showed optimal foaming at 160 °C with 2% water, achieving an expansion ratio of 27 and a half-life over 30 s. Optimal asphalt contents for gradations A and B are 3.5% and 2.5%, respectively. A 1.5% cement content provides the best performance balance. Dry and wet indirect tensile strengths increased by 91.18% and 205.56% after 3-day curing. The optimal mixing water ranges are 60–90% and 70–80% of optimum moisture content for gradations A and B. Curing time has the most significant influence on performance, followed by cement and asphalt content. This study provides a theoretical basis for optimizing foamed asphalt cold recycling.

Schlagwörter

Stichwörter der Autor:innen

cold recycled mixturefoamed asphaltfoaming characteristicsindirect tensile strengthinfluencing factors

Autor:innen und Institutionen

  • Poly Changda Overseas Engineering Co., Ltd., No. 942, Middle of Guangzhou Avenue, Tianhe District, Guangzhou 510000, China.
  • National & Local Joint Engineering Research Center of Transportation Civil Engineering Materials, Chongqing Jiaotong University, Chongqing 400074, China.
  • School of Civil Engineering, Chongqing Jiaotong University, Chongqing 400074, China.
  • Key Laboratory of Highway Construction & Maintenance Technology in Loess Region, Shanxi Transportation Technology Research and Development Co., Ltd., Taiyuan 030006, China.
  • School of Transportation and Logistics, Dalian University of Technology, Dalian 116024, China.

Förderung

  • National Natural Science Foundation of China
  • the Natural Science Foundation of Chongqing Municipality
  • Chongqing Municipality Education Commission
  • Technology Innovation and Application Development Special Foundation of Chongqing
  • Key Laboratory of Highway Construction & Maintenance Technology in Loess Region, Ministry of Transport, PRC

Zitieren

APA

Qiu, W., Li, B., Song, Z., Zou, X., Hu, M., & Bi, Y. (2026). Multi-Parameter Collaborative Optimization of Foamed Asphalt Cold Recycling Mixture Properties. Materials, 19(10), 2123. https://doi.org/10.3390/ma19102123

Vancouver

Qiu W, Li B, Song Z, Zou X, Hu M, Bi Y. Multi-Parameter Collaborative Optimization of Foamed Asphalt Cold Recycling Mixture Properties. Materials. 2026;19(10):2123. doi:10.3390/ma19102123

BibTeX
@article{Qiu2026,
  author = {Qiu, Wei and Li, Bin and Song, Ziyi and Zou, Xiaoling and Hu, Mingjun and Bi, Yanqiu},
  title = {Multi-Parameter Collaborative Optimization of Foamed Asphalt Cold Recycling Mixture Properties},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2123},
  doi = {10.3390/ma19102123}
}
Kostenlos starten →