EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Hydrated Lime on the Low-Temperature Properties of Foamed Asphalt Mixture (FAM)

Mateusz Marek Iwański iD, Małgorzata Cholewińska, Marcin Podsiadło iD

Materials · 28.07.2026 · 19 (15) · 3219

DOI: 10.3390/ma19153219 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.07.2026. Verfasst von Mateusz Marek Iwański und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Construction Engineering, Kielce University of Technology, 25-341 Kielce, Poland. Die Arbeit nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kielce University of Technology, Department of Civil Engineering and Architecture, Kielce University of Technology, Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Foamed asphalt mixtures (FAMs) are considered to be among the most environmentally friendly. They are produced at temperatures ranging from 100 °C to 120 °C. In order to produce asphalt mixtures at such a low temperature, it is necessary to produce foamed asphalt binder with high foaming parameters, i.e., maximum expansion (ER) and a half-life (HLa) of the asphalt foam. Consequently, the asphalt binders were modified with a surfactant at a concentration of 0.6% by weight of the binder, prior to its foaming with water. Subsequently, an AC 8 S asphalt mixture was designed using traditional hot-mix asphalt (HMA) technology and with modified foamed asphalt binders in quantities ranging from 5.6% to 6.5% by weight, in increments of 0.3%. To ensure optimal properties of the FAM, hydrated lime was added at levels of 0%, 15%, 30% and 45% by weight as a substitute for filler. The influence of modified foamed asphalt binders and hydrated lime on the void content (Va), resistance to moisture and frost (TSR) and resistance to permanent deformation (WTSAIR and PRDAIR) of the FAM was assessed. A key element of the research was the determination of the complex modulus of stiffness E* and resistance to low-temperature cracking R−2, σcry, Tfailure and crack propagation using the SCB methodology. Analysis of the test results using desirability functions enabled the determination of the optimum proportions of foamed asphalt binders and hydrated lime—5.9% and 30% respectively—in the FAM, ensuring that its properties meet all the requirements of the relevant standards and guaranteeing resistance to low-temperature cracking.

Schlagwörter

Stichwörter der Autor:innen

crack propagationfoamed asphalt binderfoamed asphalt mixturehydrated limeresistance to low-temperature crackingresistance to permanent deformationsurface-active agent

Autor:innen und Institutionen

  • Department of Construction Engineering, Kielce University of Technology, 25-341 Kielce, Poland.
  • Department of Transportation Engineering, Kielce University of Technology, 25-341 Kielce, Poland.
  • Faculty of Civil Engineering and Architecture, Kielce University of Technology, 25-341 Kielce, Poland.

ORCID-Profile: Mateusz Marek Iwański, Marcin Podsiadło

Förderung

  • Kielce University of Technology
  • Department of Civil Engineering and Architecture, Kielce University of Technology, Poland

Zitieren

APA

Iwański, M. M., Cholewińska, M., & Podsiadło, M. (2026). The Effect of Hydrated Lime on the Low-Temperature Properties of Foamed Asphalt Mixture (FAM). Materials, 19(15), 3219. https://doi.org/10.3390/ma19153219

Vancouver

Iwański MM, Cholewińska M, Podsiadło M. The Effect of Hydrated Lime on the Low-Temperature Properties of Foamed Asphalt Mixture (FAM). Materials. 2026;19(15):3219. doi:10.3390/ma19153219

BibTeX
@article{Iwaski2026,
  author = {Iwański, Mateusz Marek and Cholewińska, Małgorzata and Podsiadło, Marcin},
  title = {The Effect of Hydrated Lime on the Low-Temperature Properties of Foamed Asphalt Mixture (FAM)},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3219},
  doi = {10.3390/ma19153219}
}
Kostenlos starten →