Compaction Characteristics of a Foam Asphalt Hot In-Place Recycling Asphalt Mixture
Buildings · 24.12.2023 · 14 (1) · 58
DOI: 10.3390/buildings14010058 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 24.12.2023. Verfasst von Xupeng Sun und 7 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Beijing Scholars Foundation.
Abstract (Originalsprache)
This study investigates the application of foam asphalt (FA) to enhance the compaction effectiveness of a hot in-place recycling asphalt mixture (HIR-AM) during the HIR process of old road surfaces. Initially, the process parameters for FA preparation were determined through expansion-rate and half-life tests. Subsequently, the study focused on evaluating the impact of FA on the compaction quality of HIR-AM. Performance assessments were conducted through rutting tests, low-temperature bending tests, Hamburg wheel tracking tests, dynamic modulus analyses, and various other experiments to evaluate the road performance of HIR-FAM. Finally, the research findings were validated through practical engineering applications, and the construction process for HIR-FAM was summarized. The research results reveal that the optimal foaming temperature for SBS asphalt is 170 °C, with an ideal water content of 1.7%. Under the same compaction temperature, HIR-FAM demonstrated a significant reduction in void content, ranging from 3.8% to 21.2% compared to HIR-AM. Moreover, a higher proportion of FA usage resulted in a more substantial decrease in void content. Compared to HIR-AM, HIR-FAM exhibited notable improvements, including an 11.6% increase in dynamic stability, a 13.4% enhancement in bending strength, a 13.3% increase in maximum bending strain, an 8.1% improvement in residual stability, and an 8.5% boost in freeze–thaw splitting strength. Furthermore, HIR-FAM demonstrated superior water-thermal stability and resistance to low-frequency loads. Paving a test road verified that the adoption of foam asphalt in thermal recycling led to a compaction density increase of over 0.79% compared to traditional in situ thermal recycling sections, with improved compaction uniformity.
Förderung
- National Key R&D Program of China
- National Natural Science Foundation of China
- Beijing Scholars Foundation
- Natural Science Foundation of Shandong Province
Zitieren
APA
Sun, X., Guo, D., Li, J., Liu, Z., Xu, M., Hu, Q., Xu, Q., & Yang, S. (2023). Compaction Characteristics of a Foam Asphalt Hot In-Place Recycling Asphalt Mixture. Buildings, 14(1), 58. https://doi.org/10.3390/buildings14010058
Vancouver
Sun X, Guo D, Li J, Liu Z, Xu M, Hu Q, et al. Compaction Characteristics of a Foam Asphalt Hot In-Place Recycling Asphalt Mixture. Buildings. 2023;14(1):58. doi:10.3390/buildings14010058
BibTeX
@article{Sun2023,
author = {Sun, Xupeng and Guo, Dedong and Li, Jin and Liu, Zhen and Xu, Meng and Hu, Qinshuai and Xu, Qi and Yang, Shihua},
title = {Compaction Characteristics of a Foam Asphalt Hot In-Place Recycling Asphalt Mixture},
journal = {Buildings},
year = {2023},
volume = {14},
number = {1},
pages = {58},
doi = {10.3390/buildings14010058}
}
EUVIMED