The Decoupling of Hardness and Elastic Modulus in Ti-Based Metallic Glasses Induced by Elastic Pretreatment
Materials · 13.05.2026 · 19 (10) · 2024
DOI: 10.3390/ma19102024 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.05.2026. Verfasst von Anwei Wang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Astronautics, Harbin Institute of Technology, Harbin 150001, China. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, S&T Program of Shijiazhuang, the Natural Science Foundation of Hebei Province.
Abstract (Originalsprache)
In this paper, the elastic precompression method is employed as a pretreatment technique to investigate the evolution and characteristics of the micro-mechanical properties of metallic glasses. Nanoindentation analysis indicates that pre-compression treatment leads to structural rearrangement within the material, which in turn influences the nucleation and propagation of shear bands, resulting in a transition of serrated flow from a step-like to a wave-like pattern under a 400 MPa load held for 75 min. Crucially, precompression triggers a unique “decoupling” response: hardening alongside elastic softening. Further, this structural evolution is evidenced by the shear transition zone volume calculated using the jump rate method. The shear transition zone volume exhibits a nonlinear trend, initially increasing and then decreasing with increasing compressive strength and holding time, which reflects the kinetic competition mechanism between local shear instability and coordinated atomic rearrangement that arises under precompression. This study elucidates the effect of elastic precompression treatment on the micromechanical properties of a Ti-based metallic glasses, providing a reference for the optimization of plasticity in metallic glasses.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Astronautics, Harbin Institute of Technology, Harbin 150001, China.
- SANY Energy Equipment Co., Ltd., Zhuzhou 412005, China.
- SANY Petroleum Intelligent Equipment Co., Ltd., Beijing 102200, China.
- Department of Basic Teaching, Shijiazhuang Institute of Railway Technology, Shijiazhuang 050041, China.
- Department of Engineering Mechanics, Shijiazhuang Tiedao University, Shijiazhuang 050043, China.
- Hebei Key Laboratory of Mechanics of Intelligent Materials and Structures, Shijiazhuang Tiedao University, Shijiazhuang 050043, China.
Förderung
- National Natural Science Foundation of China
- S&T Program of Shijiazhuang
- the Natural Science Foundation of Hebei Province
- Natural Science Foundation of Hebei Province
Zitieren
APA
Wang, A., Wang, Y., Hou, L., Sun, H., Xie, X., Duan, J., Li, C., & Li, Y. (2026). The Decoupling of Hardness and Elastic Modulus in Ti-Based Metallic Glasses Induced by Elastic Pretreatment. Materials, 19(10), 2024. https://doi.org/10.3390/ma19102024
Vancouver
Wang A, Wang Y, Hou L, Sun H, Xie X, Duan J, et al. The Decoupling of Hardness and Elastic Modulus in Ti-Based Metallic Glasses Induced by Elastic Pretreatment. Materials. 2026;19(10):2024. doi:10.3390/ma19102024
BibTeX
@article{Wang2026,
author = {Wang, Anwei and Wang, Yang and Hou, Lei and Sun, Hanxiao and Xie, Xinyi and Duan, Jingbo and Li, Chen and Li, Yansen},
title = {The Decoupling of Hardness and Elastic Modulus in Ti-Based Metallic Glasses Induced by Elastic Pretreatment},
journal = {Materials},
year = {2026},
volume = {19},
number = {10},
pages = {2024},
doi = {10.3390/ma19102024}
}
EUVIMED