EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Ti/Ta Ratio and Processing Routes on the Hardness and Elastic Modulus of Porous TiNbZrTa Alloys

Celia González-Guillén iD, Ghaith Al Hawajreh Kamel, Eduardo Degalez-Duran, Elizaveta Klyatskina iD, Muhammad Naeem iD, Liliana Romero-Resendiz iD, Gonzalo Gonzalez iD, Vicente Amigó Borrás iD

Materials · 27.11.2023 · 16 (23) · 7362

DOI: 10.3390/ma16237362 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.11.2023. Verfasst von Celia González-Guillén und 7 weiteren Autor:innen. Beteiligte Einrichtung: Instituto de Tecnología de Materiales, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia, Spain. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia e Innovación, Programa de Apoyo a Proyectos de Investigacion e Innovacion Tecnologica (PAPIIT)-290 UNAM, Programa de Apoyo a la Investigación y el Posgrado 291 (PAIP) FQ-UNAM.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

TiNbZrTa alloys are promising for multidisciplinary applications, such as refractory and biomedical purposes, due to their high thermal stability and non-toxicity. Hardness and elastic modulus are among the key features for their adequate industrial applications. The influence of porosity and Ti/Ta ratio were investigated on TiNbZrTa alloys produced by three different processing routes, i.e., (i) blend element and posterior press and sintering (BE + P&S); (ii) mechanical alloying with press and sintering (MA + P&S); and (iii) arc melting and casting. Porosity decreased in the following order: casting < MA + P&S < BE + P&S. The total porosity of alloys increased with increasing Ta contents, i.e., by lowering the Ti/Ta ratio. However, the Ti/Ta ratio did not considerably affect the bonding energy or the elastic modulus. Hardness was increased significantly in dense alloys compared to porous ones. However, porosity and Ti/Ta ratio did not show a clear trend in hardness among the porous alloys.

Schlagwörter

Stichwörter der Autor:innen

blend elementcastinghigh-entropy alloyimpulse excitation techniquemechanical alloyingmechanical propertiesporositypowder metallurgy

Autor:innen und Institutionen

  • Instituto de Tecnología de Materiales, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia, Spain.
  • Departamento de Ingeniería Metalúrgica, Facultad de Química, Universidad Nacional Autónoma de México, Mexico City 04510, Mexico.
  • School of Metallurgy and Materials, University of Birmingham, Birmingham B15 2TT, UK.
  • Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito Exterior S/N, Cd. Universitaria, A. P. 70-360, Coyoacán C.P. 04510, Mexico.

ORCID-Profile: Celia González-Guillén, Elizaveta Klyatskina, Muhammad Naeem, Liliana Romero-Resendiz, Gonzalo Gonzalez, Vicente Amigó Borrás

Förderung

  • Ministerio de Ciencia e Innovación
  • Programa de Apoyo a Proyectos de Investigacion e Innovacion Tecnologica (PAPIIT)-290 UNAM
  • Programa de Apoyo a la Investigación y el Posgrado 291 (PAIP) FQ-UNAM
  • Spanish Ministerio de Ciencia, Innovación y Universidades
  • European Commission via the European Regional Development Fund (FEDER)
  • UNAM-DGAPA-PASPA program (sabbatical year of G.G.)
  • Programa de Apoyo a Proyectos de Investigacion e Innovacion Tecnologica (PAPIIT)-UNAM
  • Programa de Apoyo a la Investigación y el Posgrado (PAIP) of the Facultad de Química of Universidad Nacional Autónoma de México

Zitieren

APA

González-Guillén, C., Al Hawajreh Kamel, G., Degalez-Duran, E., Klyatskina, E., Naeem, M., Romero-Resendiz, L., Gonzalez, G., & Amigó Borrás, V. (2023). The Effect of Ti/Ta Ratio and Processing Routes on the Hardness and Elastic Modulus of Porous TiNbZrTa Alloys. Materials, 16(23), 7362. https://doi.org/10.3390/ma16237362

Vancouver

González-Guillén C, Al Hawajreh Kamel G, Degalez-Duran E, Klyatskina E, Naeem M, Romero-Resendiz L, et al. The Effect of Ti/Ta Ratio and Processing Routes on the Hardness and Elastic Modulus of Porous TiNbZrTa Alloys. Materials. 2023;16(23):7362. doi:10.3390/ma16237362

BibTeX
@article{GonzlezGuilln2023,
  author = {González-Guillén, Celia and Al Hawajreh Kamel, Ghaith and Degalez-Duran, Eduardo and Klyatskina, Elizaveta and Naeem, Muhammad and Romero-Resendiz, Liliana and Gonzalez, Gonzalo and Amigó Borrás, Vicente},
  title = {The Effect of Ti/Ta Ratio and Processing Routes on the Hardness and Elastic Modulus of Porous TiNbZrTa Alloys},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {23},
  pages = {7362},
  doi = {10.3390/ma16237362}
}
Kostenlos starten →