Optimizing the Elastic Modulus Temperature Coefficient of Ti-45Nb Alloy by Aging-Induced Nano-Precipitation α Phase
Materials · 29.11.2024 · 17 (23) · 5871
DOI: 10.3390/ma17235871 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 29.11.2024. Verfasst von Fujian Guo und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Guangdong Ocean University, Yangjiang 529500, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen scientific and technological project, Scientific Research Start-up Project of Guangdong Ocean University.
Abstract (Originalsprache)
Titanium–Niobium alloys have garnered extensive interest in various fields, such as aerospace, medical equipment, and scientific research instruments, due to their superior properties. Particularly, their anti-magnetic characteristics render them high potential in the watchmaking industry. The temperature coefficient of the elastic modulus of balance spring materials is a crucial parameter for assessing the impact of temperature on the properties of TiNb alloys. This study aims to explore the influence of heat treatment on the microstructural and elastic modulus temperature coefficient of the Ti-45Nb alloy. The results indicate that after short-term aging treatment, ω particles are enriched at grain boundaries and defects and are distributed in a necklace shape after erosion. After long-term aging treatment, the α phase appears in the material. The phase transformation process of low-temperature aging is β → β + β′ → β + ω → β + ω + α. The grain size of the material does not change significantly after different treatments. Additionally, the effect of heat treatment on material properties was studied by a low-temperature dynamic elastic modulus tester. The results showed that the temperature coefficient of the elastic modulus of the material in its original state was relatively high, ranging from 50~220 × 10−6·°C−1. After long-time aging treatment, the temperature coefficient of the elastic modulus of the material decreased significantly due to the appearance of the α phase. The temperature coefficient of the elastic modulus of the material after 48 h of heat preservation treatment fluctuated at 0 ± 30 × 10−6·°C−1. The internal control standard of excellent products in the industry is −11~35 × 10−6/°C. This study provides significant practical implications for the application of Ti-45Nb alloy in the watchmaking industry by adjusting the heat treatment temperature and time to study the effects on organizational evolution and the temperature coefficient of the elastic modulus.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Guangdong Ocean University, Yangjiang 529500, China.
- Yang Jiang Advanced Alloys Laboratory, Yangjiang 529500, China.
- State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China.
- Shenzhen Fiyta Precision Technology Ltd., Shenzhen 518057, China.
ORCID-Profile: Fujian Guo
Förderung
- Shenzhen scientific and technological project
- Scientific Research Start-up Project of Guangdong Ocean University
Zitieren
APA
Guo, F., Lu, G., Liu, W., Zhang, P., Jin, L., & Shang, C. (2024). Optimizing the Elastic Modulus Temperature Coefficient of Ti-45Nb Alloy by Aging-Induced Nano-Precipitation α Phase. Materials, 17(23), 5871. https://doi.org/10.3390/ma17235871
Vancouver
Guo F, Lu G, Liu W, Zhang P, Jin L, Shang C. Optimizing the Elastic Modulus Temperature Coefficient of Ti-45Nb Alloy by Aging-Induced Nano-Precipitation α Phase. Materials. 2024;17(23):5871. doi:10.3390/ma17235871
BibTeX
@article{Guo2024,
author = {Guo, Fujian and Lu, Guangyi and Liu, Wenle and Zhang, Pan and Jin, Lei and Shang, Chengjia},
title = {Optimizing the Elastic Modulus Temperature Coefficient of Ti-45Nb Alloy by Aging-Induced Nano-Precipitation α Phase},
journal = {Materials},
year = {2024},
volume = {17},
number = {23},
pages = {5871},
doi = {10.3390/ma17235871}
}
EUVIMED