Mechanical and Bond Behavior of a Hybrid Steel–Basalt–Polypropylene Fiber-Reinforced High-Performance Concrete with Steel, GFRP or CFRP Bars
Materials · 2026-04-13 · 19 (8) · 1546
DOI: 10.3390/ma19081546 ↗At a glance
Journal article in Materials, published online on 2026-04-13. Written by Piotr Smarzewski. Institution: Faculty of Civil Engineering and Geodesy, Military University of Technology, 2 Gen. Sylwestra Kaliskiego, 00-908 Warsaw, Poland. 39 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
This study addresses the limited availability of unified experimental datasets comparing ribbed steel and smooth FRP bars embedded in the same hybrid-fiber high-performance concrete (HPC) matrix under identical conditions. It investigates the mechanical and bond behavior of a triple-fiber HPC combining hooked-end steel (ST), basalt (BA), and polypropylene (PP) fibers and reinforced with steel, GFRP, and CFRP bars of identical diameter and embedment. Under a uniform curing regime, the HFRC reached a compressive strength of approximately 82 MPa and exhibited a high fracture energy Gf approximately 3.7 kJ/m2 with a stable post-peak response in a notched-beam test, demonstrating effective multi-scale crack bridging within a dense hybrid fiber network. Pull-out tests on 200 mm embedment revealed distinct interfacial mechanisms: ribbed steel developed a pronounced peak bond stress (τmax = 13.05 MPa) and the largest bond energy (Gb = 146 N/mm) due to mechanical interlock, whereas smooth GFRP and CFRP showed low τmax (=1.46 and 0.78 MPa) and smoothly decaying τ–s governed by adhesion–friction with Gb = 3–4 N/mm. A consistent experimental framework enabled direct mechanistic comparison of bond–slip behavior across reinforcement types without confounding matrix or curing variables. Simple constitutive laws calibrated to the experimental τ–s curves (ramp–softening for steel and ramp–plateau or exponential for FRP) captured the stiffness, strength, and energy hierarchy with low error. The main contribution of this study lies in providing a configuration-consistent reference dataset and calibrated bond–slip descriptions for hybrid-fiber HPC members reinforced with both steel and FRP bars. The results highlight the role of the hybrid fiber network in improving crack stability and provide design-oriented parameters for anchorage assessment and nonlinear bond–slip modeling. Although the results are based on a limited experimental program, they establish a mechanistically coherent basis for further optimization of hybrid HPC matrices and development of performance-based anchorage formulations in high-performance structural applications.
Subjects
Author keywords
Authors and institutions
- Faculty of Civil Engineering and Geodesy, Military University of Technology, 2 Gen. Sylwestra Kaliskiego, 00-908 Warsaw, Poland.
ORCID profiles: Piotr Smarzewski
Cite
APA
Smarzewski, P. (2026). Mechanical and Bond Behavior of a Hybrid Steel–Basalt–Polypropylene Fiber-Reinforced High-Performance Concrete with Steel, GFRP or CFRP Bars. Materials, 19(8), 1546. https://doi.org/10.3390/ma19081546
Vancouver
Smarzewski P. Mechanical and Bond Behavior of a Hybrid Steel–Basalt–Polypropylene Fiber-Reinforced High-Performance Concrete with Steel, GFRP or CFRP Bars. Materials. 2026;19(8):1546. doi:10.3390/ma19081546
BibTeX
@article{Smarzewski2026,
author = {Smarzewski, Piotr},
title = {Mechanical and Bond Behavior of a Hybrid Steel–Basalt–Polypropylene Fiber-Reinforced High-Performance Concrete with Steel, GFRP or CFRP Bars},
journal = {Materials},
year = {2026},
volume = {19},
number = {8},
pages = {1546},
doi = {10.3390/ma19081546}
}
EUVIMED