Effects of Sand-Coated and Ribbed GFRP Bars in Hybrid GFRP-Steel-Reinforced Concrete Beams
Materials · 30.03.2026 · 19 (7) · 1372
DOI: 10.3390/ma19071372 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 30.03.2026. Verfasst von Rajeev Devaraj und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Science, Technology and Engineering, University of the Sunshine Coast, 90 Sippy Downs Dr., Sippy Downs, QLD 4556, Australia. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The integration of glass fibre-reinforced polymer (GFRP) and steel reinforcement in hybrid RC beams offers durability benefits, yet the specific influence of GFRP surface treatments on bond mechanics remains critical. This study experimentally investigates the performance of hybrid GFRP-steel-reinforced beams under three-point bending, comparing sand-coated and ribbed GFRP bars, while maintaining a constant total reinforcement ratio of 1.4% to isolate interface mechanics. Due to the exploratory nature of the study and the specific specimen matrix, the results are interpreted as observed experimental trends rather than statistically generalised performance metrics. The results indicate that ribbed GFRP bars provide enhance mechanical interlocking; in this specific experimental program, the ribbed GFRP hybrid beam exhibits an observed load capacity approximately 11% greater than the sand-coated specimen in this study and surpassing comparable steel-only beams. Additionally, ribbed configurations demonstrated an observed 15% higher toughness. In contrast, sand-coated hybrid beams exhibited signs of premature bond degradation, quantitatively captured by strain gauge monitoring; sand-coated bars plateaued at 14,000 µε, reaching only 79% of their theoretical rupture capacity. This strain limitation indicates failure by internal slippage rather than material rupture, further evidenced by a 50% reduction in crack propagation compared to ribbed beams. While energy-based ductility indices suggest a marginal 6% advantage for sand-coated bars, both hybrid systems exhibited relatively low energy-based ductility indices (μ < 2), reflecting the linear-elastic nature of GFRP reinforcement. These findings suggest that the mechanical interlock of ribbed surface treatments is more resilient under the combined stress states typical of hybrid configurations, providing a foundational baseline for the development of future numerical models and reliability-based design frameworks for hybrid GFRP-steel-RC systems.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Science, Technology and Engineering, University of the Sunshine Coast, 90 Sippy Downs Dr., Sippy Downs, QLD 4556, Australia.
ORCID-Profile: Rajeev Devaraj, Ayodele Olofinjana, Christophe Gerber
Zitieren
APA
Devaraj, R., Olofinjana, A., & Gerber, C. (2026). Effects of Sand-Coated and Ribbed GFRP Bars in Hybrid GFRP-Steel-Reinforced Concrete Beams. Materials, 19(7), 1372. https://doi.org/10.3390/ma19071372
Vancouver
Devaraj R, Olofinjana A, Gerber C. Effects of Sand-Coated and Ribbed GFRP Bars in Hybrid GFRP-Steel-Reinforced Concrete Beams. Materials. 2026;19(7):1372. doi:10.3390/ma19071372
BibTeX
@article{Devaraj2026,
author = {Devaraj, Rajeev and Olofinjana, Ayodele and Gerber, Christophe},
title = {Effects of Sand-Coated and Ribbed GFRP Bars in Hybrid GFRP-Steel-Reinforced Concrete Beams},
journal = {Materials},
year = {2026},
volume = {19},
number = {7},
pages = {1372},
doi = {10.3390/ma19071372}
}
EUVIMED