EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

The Low-Velocity Oblique Impact Resistance of 3D-Printed Bouligand Laminates

Shuo Wang, Yangbo Li iD, Xianqiang Ge, Yahui Yang iD, Junjie Li

Materials · 2026-04-09 · 19 (8) · 1502

DOI: 10.3390/ma19081502 ↗

At a glance

Journal article in Materials, published online on 2026-04-09. Written by Shuo Wang and 4 co-authors. Institution: College of Hydraulic and Environmental Engineering, China Three Gorges University, Yichang 443002, China. 49 references. The full text is freely available (open access, CC BY 4.0). Funded by: Yahui Yang, Research Fund for Hubei Provincial Key Laboratory of Construction and Management in Hydropower Engineering, Three Gorges University, Research Fund for Hubei International Science and Technology Cooperation Base of Fish Passage, China Three Gorges University, Yichang, 443002, The 111 Project of Hubei Province.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Traditional homogeneous materials often face an inherent trade-off between strength and toughness, restricting their application in high-performance impact protection. Mechanical metamaterials overcome this fundamental limitation by integrating structure and material. The 3D-printed Bouligand laminates (3DPBLs), a type of mechanical metamaterial, are renowned for their exceptional impact resistance. While the 3DPBLs have been proven to provide superior resistance under normal impact, actual service conditions inevitably involve complex, multi-directional loading. We aimed to investigate the 3DPBLs’ oblique impact resistance here. To this purpose, samples of 3DPBLs with varying helical angles (0°, 7°, 15°, 60°, 90°) were fabricated and subjected to low-velocity drop-weight impact tests at impact angles of 0°, 30°, 45°, and 60° to evaluate their damage evolution and energy dissipation. The experimental investigation exhibited distinct temporal evolutions of contact forces, with the 15° helical configuration identified as the optimal design. Further numerical analysis using a finite element model (validated with a deviation < 10%) is conducted to simulate performance under diverse impact angles in order to validate the reasonability of the experimental investigation. Mechanistically, 3DPBLs enhance impact resistance by increasing fracture tortuosity through their periodically rotated layered structure. These findings establish a theoretical foundation for developing high-performance, lightweight, and toughened protective materials.

Subjects

Author keywords

3D printing (3DP)Bouligand structureimpact anglelow-speed oblique impact

Authors and institutions

  • College of Hydraulic and Environmental Engineering, China Three Gorges University, Yichang 443002, China.
  • POWERCHINA BEIJING Engineering Corporation Limited, Beijing 100024, China.

ORCID profiles: Yangbo Li, Yahui Yang

Funding

  • Yahui Yang, Research Fund for Hubei Provincial Key Laboratory of Construction and Management in Hydropower Engineering, Three Gorges University
  • Research Fund for Hubei International Science and Technology Cooperation Base of Fish Passage, China Three Gorges University, Yichang, 443002
  • The 111 Project of Hubei Province
  • Research Fund for Hubei International Science and Technology Cooperation Base of Fish Passage, China Three Gorges University, Yichang
  • 111 Project of Hubei Province

Cite

APA

Wang, S., Li, Y., Ge, X., Yang, Y., & Li, J. (2026). The Low-Velocity Oblique Impact Resistance of 3D-Printed Bouligand Laminates. Materials, 19(8), 1502. https://doi.org/10.3390/ma19081502

Vancouver

Wang S, Li Y, Ge X, Yang Y, Li J. The Low-Velocity Oblique Impact Resistance of 3D-Printed Bouligand Laminates. Materials. 2026;19(8):1502. doi:10.3390/ma19081502

BibTeX
@article{Wang2026,
  author = {Wang, Shuo and Li, Yangbo and Ge, Xianqiang and Yang, Yahui and Li, Junjie},
  title = {The Low-Velocity Oblique Impact Resistance of 3D-Printed Bouligand Laminates},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1502},
  doi = {10.3390/ma19081502}
}
Start for free →