EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low-Velocity Impact Evaluation of 3D-Printed Hybrid Bio-Composite Sandwich Panels by FDM

Farhad Belalpour Dastjerdi, Hom N. Dhakal

Journal of Composites Science · 18.11.2026 · 10 (11) · 621

DOI: 10.3390/jcs10110621 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 18.11.2026. Verfasst von Farhad Belalpour Dastjerdi und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The demand for bio-composite sandwich structures is increasing in lightweight design applications due to their attractive attributes, including a high strength-to-weight ratio, reduced overall weight of the structures, and high bending stiffness, leading to positive environmental benefits. The objectives of this study were to investigate the low-velocity impact (LVI) response of sandwich panels with three different face sheets made of carbon fibre/polylactic acid (PLA), carbon fibre/flax/PLA, and carbon fibre/hemp/PLA, respectively. Balsa wood was used as a bio-core material in all types of sandwich composites fabricated by the Fused Deposition Modelling (FDM) 3D-printing method. The specimens were tested at three different incident impact energy levels (10 J, 15 J, and 20 J) to investigate the influence of incident energy levels on the damage evolution and mechanisms. The findings indicated that the material of the face sheets influenced the impact resistance and energy absorption characteristics. Furthermore, the damage characteristics were evaluated using X-ray micro-computed tomography to visualise the damage severity and mechanisms at different energy levels. This approach allowed for observing the barely visible damage (BVD), damage up to perforation, and damage up to penetration. The experimental results at impact energy levels of 10 J and 15 J displayed that the hybrid carbon fibre/flax/PLA provided enhanced energy absorption compared to the other composite types, representing a viable alternative to carbon fibre/PLA non-hybridised composite hybrid sandwich structures suitable for various impact-toughness-related non-critical engineering applications. The findings of this work also show that the FDM 3D-printing method can be used to produce advanced sandwich panels with promising impact-resistance behaviours.

Zitieren

APA

Dastjerdi, F. B., & Dhakal, H. N. (2026). Low-Velocity Impact Evaluation of 3D-Printed Hybrid Bio-Composite Sandwich Panels by FDM. Journal of Composites Science, 10(11), 621. https://doi.org/10.3390/jcs10110621

Vancouver

Dastjerdi FB, Dhakal HN. Low-Velocity Impact Evaluation of 3D-Printed Hybrid Bio-Composite Sandwich Panels by FDM. Journal of Composites Science. 2026;10(11):621. doi:10.3390/jcs10110621

BibTeX
@article{Dastjerdi2026,
  author = {Dastjerdi, Farhad Belalpour and Dhakal, Hom N.},
  title = {Low-Velocity Impact Evaluation of 3D-Printed Hybrid Bio-Composite Sandwich Panels by FDM},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {11},
  pages = {621},
  doi = {10.3390/jcs10110621}
}
Kostenlos starten →