Precise Pressure Control for Screw Extrusion 3D Printing of PP-GF Composites Based on Inverse Model Feedforward and Variable Structure Feedback
Materials · 05.04.2026 · 19 (7) · 1453
DOI: 10.3390/ma19071453 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 05.04.2026. Verfasst von Yunlong Ma und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Engineering, Zhejiang Normal University, Jinhua 321004, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Major and Key Science and Technology Plan Project of Jinhua City.
Abstract (Originalsprache)
Addressing challenges such as the non-Newtonian fluid characteristics of melt, significant system hysteresis, and rheological thermal drift in large-scale glass fiber-reinforced polypropylene (PP-GF) screw-extrusion additive manufacturing (SEAM), this paper proposes a composite pressure control strategy based on inverse model feedforward and variable-structure feedback (VSFC-Smith). This strategy establishes a dynamic pressure benchmark through an inverse rheological model, utilizes a Smith predictor to compensate for time delay, and introduces dead-zone variable-structure feedback to smoothly suppress thermal drift. Experimental results demonstrate that, compared to traditional PID (Proportional-Integral-Derivative) controller, the VSFC-Smith strategy reduces the step pressure overshoot from 23.37% to 17.37%, decreases steady-state screw speed fluctuation by approximately 50%, and limits the error within ±0.04 MPa during complex trajectory tracking. In practical molding validation, this strategy effectively suppressed surface ripples, reducing the surface roughness (Sa) by 14.5% to 124.41 μm; simultaneously, the Z-directional interlayer tensile strength reached 12.63 MPa (a 22.5% improvement compared to open-loop control). This study successfully overcomes the limitations of traditional high-gain feedback, achieving synergistic optimization of the macroscopic morphology and microscopic mechanical properties of composite parts.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Engineering, Zhejiang Normal University, Jinhua 321004, China.
- Tianjin Institute of Aerospace Mechanical and Electrical Equipment, Tianjin 300456, China.
Förderung
- Major and Key Science and Technology Plan Project of Jinhua City
Zitieren
APA
Ma, Y., Li, X., Ma, N., Yao, Y., Wang, S., & Hu, Z. (2026). Precise Pressure Control for Screw Extrusion 3D Printing of PP-GF Composites Based on Inverse Model Feedforward and Variable Structure Feedback. Materials, 19(7), 1453. https://doi.org/10.3390/ma19071453
Vancouver
Ma Y, Li X, Ma N, Yao Y, Wang S, Hu Z. Precise Pressure Control for Screw Extrusion 3D Printing of PP-GF Composites Based on Inverse Model Feedforward and Variable Structure Feedback. Materials. 2026;19(7):1453. doi:10.3390/ma19071453
BibTeX
@article{Ma2026,
author = {Ma, Yunlong and Li, Xiping and Ma, Nan and Yao, Youqiang and Wang, Sisi and Hu, Zhonglue},
title = {Precise Pressure Control for Screw Extrusion 3D Printing of PP-GF Composites Based on Inverse Model Feedforward and Variable Structure Feedback},
journal = {Materials},
year = {2026},
volume = {19},
number = {7},
pages = {1453},
doi = {10.3390/ma19071453}
}
EUVIMED