3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments
Materials · 26.12.2025 · 19 (1) · 93
DOI: 10.3390/ma19010093 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 26.12.2025. Verfasst von Fabian B Rodriguez und 7 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical and Thermal Engineering Sciences Directorate, National Laboratory of the Rockies, 15013 Denver West Parkway, Golden, CO 80401, USA. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Laboratory of the Rockies, National Laboratory of the Rockies for the U.S. Department of Energy, Laboratory Directed Research and Development (LDRD) Program at the National Laboratory of the Rockies.
Abstract (Originalsprache)
Global demand for adaptable and rapidly deployable construction solutions in offshore, coastal, and fluvial environments continues to rise, driven by pressing needs to develop energy platforms, improve coastal resilience, and support emergency response in the face of natural disasters. Increased investment in human-made coastal infrastructure, such as piers, support structures for power lines, offshore wind farms, and seawall protection systems, further underscores this trend. This study investigates the development of printable concrete mixtures for underwater environments using seawater as a replacement for freshwater, using a 3D printing syringe-based extrusion system. The effect of seawater addition and the printing medium (in air vs. underwater) was assessed via rheological and mechanical performance characterization. The results indicate rheological properties are favorable for seawater adoption by producing mixtures with higher yield stress and viscosity with the same levels of admixtures used for freshwater. Seawater-based mixtures demonstrated superior dimensional stability compared to freshwater counterparts, maintaining cross-sectional geometry, while compressive strength results showed no statistical differences between in-air and underwater samples. However, flexural strength was significantly influenced by geometry and printing medium. These findings establish critical rheological parameters for printable underwater mixtures and highlight the need for optimized curing strategies and layer bonding techniques to improve interfacial strength in underwater 3D printing applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical and Thermal Engineering Sciences Directorate, National Laboratory of the Rockies, 15013 Denver West Parkway, Golden, CO 80401, USA.
- Bioeconomy and Sustainable Transportation Directorate, National Laboratory of the Rockies, 15013 Denver West Parkway, Golden, CO 80401, USA.
ORCID-Profile: Fabian B Rodriguez, Anastasia N Aday, Drazenka Svedruzic
Förderung
- National Laboratory of the Rockies
- National Laboratory of the Rockies for the U.S. Department of Energy
- Laboratory Directed Research and Development (LDRD) Program at the National Laboratory of the Rockies
Zitieren
APA
Rodriguez, F. B., Vugteveen, C., Fross, X., Wei, H., Himmel, M. E., Aday, A. N., Svedruzic, D., & Kevern, J. T. (2025). 3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments. Materials, 19(1), 93. https://doi.org/10.3390/ma19010093
Vancouver
Rodriguez FB, Vugteveen C, Fross X, Wei H, Himmel ME, Aday AN, et al. 3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments. Materials. 2025;19(1):93. doi:10.3390/ma19010093
BibTeX
@article{Rodriguez2025,
author = {Rodriguez, Fabian B and Vugteveen, Caiden and Fross, Xavier and Wei, Hui and Himmel, Michael E and Aday, Anastasia N and Svedruzic, Drazenka and Kevern, John T},
title = {3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments},
journal = {Materials},
year = {2025},
volume = {19},
number = {1},
pages = {93},
doi = {10.3390/ma19010093}
}
EUVIMED