EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Geopolymer Materials for Extrusion-Based 3D-Printing: A Review

Laura Ricciotti iD, Antonio Apicella iD, Valeria Perrotta, Raffaella Aversa

Polymers · 12.12.2023 · 15 (24) · 4688

DOI: 10.3390/polym15244688 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 12.12.2023. Verfasst von Laura Ricciotti und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Architecture and Industrial Design, University of Campania, Luigi Vanvitelli, 81031 Aversa, Italy. Die Arbeit wurde bisher 67-mal zitiert (Crossref) und nennt 204 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper examines how extrusion-based 3D-printing technology is evolving, utilising geopolymers (GPs) as sustainable inorganic aluminosilicate materials. Particularly, the current state of 3D-printing geopolymers is critically examined in this study from the perspectives of the production process, printability need, mix design, early-age material features, and sustainability, with an emphasis on the effects of various elements including the examination of the fresh and hardened properties of 3D-printed geopolymers, depending on the matrix composition, reinforcement type, curing process, and printing configuration. The differences and potential of two-part and one-part geopolymers are also analysed. The applications of advanced printable geopolymer materials and products are highlighted, along with some specific examples. The primary issues, outlooks, and paths for future efforts necessary to advance this technology are identified.

Schlagwörter

Stichwörter der Autor:innen

3D-printingadditive manufacturingflowabilitygeopolymerprintabilityrheology

Autor:innen und Institutionen

  • Department of Architecture and Industrial Design, University of Campania, Luigi Vanvitelli, 81031 Aversa, Italy.
  • Advanced Material Laboratory, Department of Architecture and Industrial Design, University of Campania, Luigi Vanvitelli, 81031 Aversa, Italy.

ORCID-Profile: Laura Ricciotti, Antonio Apicella

Zitieren

APA

Ricciotti, L., Apicella, A., Perrotta, V., & Aversa, R. (2023). Geopolymer Materials for Extrusion-Based 3D-Printing: A Review. Polymers, 15(24), 4688. https://doi.org/10.3390/polym15244688

Vancouver

Ricciotti L, Apicella A, Perrotta V, Aversa R. Geopolymer Materials for Extrusion-Based 3D-Printing: A Review. Polymers. 2023;15(24):4688. doi:10.3390/polym15244688

BibTeX
@article{Ricciotti2023,
  author = {Ricciotti, Laura and Apicella, Antonio and Perrotta, Valeria and Aversa, Raffaella},
  title = {Geopolymer Materials for Extrusion-Based 3D-Printing: A Review},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {24},
  pages = {4688},
  doi = {10.3390/polym15244688}
}
Kostenlos starten →