Application of Kolmogorov–Sinai Metric Entropy to Determine the Exploitation Parameters of Epoxy–Glass Composites with Carbonisate
Materials · 23.10.2025 · 18 (21) · 4858
DOI: 10.3390/ma18214858 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 23.10.2025. Verfasst von Agata Wieczorska und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Marine Engineering, Gdynia Maritime University, Morska St. 81-87, 81-225 Gdynia, Poland. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovation Incubator 4.0.
Abstract (Originalsprache)
This study investigates how the addition of a carbon-based filler obtained through the pyrolysis of medium-density fibreboard (MDF) waste affects the mechanical behaviour of epoxy–glass laminates. Two laminate series with different matrix-to-reinforcement ratios (60/40 and 65/35) were fabricated and modified with carbonised particles of up to 500 μm in size, introduced at 5% and 7.5%. The strength of the samples made of the materials mentioned above was assessed in a static three-point bending test by analysing the values of stresses (σfM) and strains (εfM). For an in-depth analysis of the dynamics of the destruction process, the recorded deformation data were subjected to Kolmogorov–Sinai metric entropy (EK−S). The test results showed that the addition of carbonisate in series A (60/40) increased the flexural strength by 32.56% for the sample with 5% addition and by 27.08% for the sample with 7.5% addition, compared to the reference material. In series B (65/35), characterised by a higher resin content, the opposite effect was observed—a decrease in strength of 9.89% (for 5% carbonisate) and 15.53% (for 7.5% carbonisate). The use of EK−S calculations in combination with phase portrait reconstruction to analyse the results obtained allowed for the precise determination of the limit values of stresses and strains (σfMK_S and εfMK_S) at which irreversible structural changes occur in the material, initiating the destruction process. This method proved to be an effective tool for identifying early signs of composite degradation, which is crucial for assessing its long-term strength and designing safe structures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Marine Engineering, Gdynia Maritime University, Morska St. 81-87, 81-225 Gdynia, Poland.
ORCID-Profile: Agata Wieczorska, Grzegorz Hajdukiewicz
Förderung
- Innovation Incubator 4.0
Zitieren
APA
Wieczorska, A., & Hajdukiewicz, G. (2025). Application of Kolmogorov–Sinai Metric Entropy to Determine the Exploitation Parameters of Epoxy–Glass Composites with Carbonisate. Materials, 18(21), 4858. https://doi.org/10.3390/ma18214858
Vancouver
Wieczorska A, Hajdukiewicz G. Application of Kolmogorov–Sinai Metric Entropy to Determine the Exploitation Parameters of Epoxy–Glass Composites with Carbonisate. Materials. 2025;18(21):4858. doi:10.3390/ma18214858
BibTeX
@article{Wieczorska2025,
author = {Wieczorska, Agata and Hajdukiewicz, Grzegorz},
title = {Application of Kolmogorov–Sinai Metric Entropy to Determine the Exploitation Parameters of Epoxy–Glass Composites with Carbonisate},
journal = {Materials},
year = {2025},
volume = {18},
number = {21},
pages = {4858},
doi = {10.3390/ma18214858}
}
EUVIMED