Analysis of the Strength Properties of Epoxy–Glass Composites Modified with the Addition of Rubber Recyclate Using Kolmogorov–Sinai Metric Entropy
Materials · 13.01.2024 · 17 (2) · 411
DOI: 10.3390/ma17020411 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.01.2024. Verfasst von Daria Żuk und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Gdynia Maritime University, 81-225 Gdynia, Poland. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovation Incubator 4.0, Support for the management of scientific research and commercialization of the results of R&D work in scientific units and enterprises, Smart Growth Operational Program 2014–2020 (Measure 4.4).
Abstract (Originalsprache)
This paper presents the results of investigations of the mechanical properties of epoxy–glass composites with the addition of rubber recyclate. For the purposes of the study, seven variants of materials were designed and manufactured, which differed in terms of the percentage of recyclate content (3, 5 and 7%) and the way the recyclate was distributed in the composite (one, two and three layers with a constant share of 5%). Tests of comparative mechanical properties were carried out using a static tensile test. As a result of the conducted tests, the following values were obtained for all variants of materials: tensile strength (Rm), Young’s modulus (E) and percentage relative strain ε. In addition, for a deeper analysis of the results obtained, statistical calculations of Kolgomorov–Sinai EK-S metric entropy were performed on the experimental data sets, which were then analyzed. The results of the analysis indicate that the application of metric entropy calculations EK-S can be helpful in identifying changes in the internal structure of the composite material that occur during its loading, and which do not manifest themselves in any other tangible way. The data obtained as a result of the research can be used to optimize production processes and to determine the further direction of development of epoxy–glass composites with the addition of rubber recyclate, while saving time and resources.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Gdynia Maritime University, 81-225 Gdynia, Poland.
ORCID-Profile: Daria Żuk, Norbert Abramczyk
Förderung
- Innovation Incubator 4.0
- Support for the management of scientific research and commercialization of the results of R&D work in scientific units and enterprises
- Smart Growth Operational Program 2014–2020 (Measure 4.4)
Zitieren
APA
Żuk, D., Abramczyk, N., & Hajdukiewicz, G. (2024). Analysis of the Strength Properties of Epoxy–Glass Composites Modified with the Addition of Rubber Recyclate Using Kolmogorov–Sinai Metric Entropy. Materials, 17(2), 411. https://doi.org/10.3390/ma17020411
Vancouver
Żuk D, Abramczyk N, Hajdukiewicz G. Analysis of the Strength Properties of Epoxy–Glass Composites Modified with the Addition of Rubber Recyclate Using Kolmogorov–Sinai Metric Entropy. Materials. 2024;17(2):411. doi:10.3390/ma17020411
BibTeX
@article{uk2024,
author = {Żuk, Daria and Abramczyk, Norbert and Hajdukiewicz, Grzegorz},
title = {Analysis of the Strength Properties of Epoxy–Glass Composites Modified with the Addition of Rubber Recyclate Using Kolmogorov–Sinai Metric Entropy},
journal = {Materials},
year = {2024},
volume = {17},
number = {2},
pages = {411},
doi = {10.3390/ma17020411}
}
EUVIMED