Effect of Microstructure and Crystallographic Texture on the Fracture Toughness Anisotropy of LPBF IN718
Materials · 10.08.2025 · 18 (16) · 3737
DOI: 10.3390/ma18163737 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.08.2025. Verfasst von José David Perez-Ruiz und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Universidad Industrial de Santander, Bucaramanga 680002, Colombia. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Agency for Research and Development of Chile (ANID), Basque Government, NEOPHYM project.
Abstract (Originalsprache)
Fracture toughness anisotropy is a key concern in IN718 components produced by Laser Powder Bed Fusion (LPBF), due to their strong crystallographic texture and characteristic lamellar microstructure. In this study, the effect of grain orientation on fracture toughness was evaluated by testing two LPBF IN718 builds with the same laser scanning strategy (R0), but with two different orientations: vertical (R0-0) and 45° inclined (R0-45) relative to the build direction. The mechanical response was assessed through compact tension (CT) tests following ASTM E399 and ASTM E1820 standards. Results show that the R0-45 specimens exhibited a fracture toughness nearly 2.5 times higher than R0-0 specimens. Detailed microstructural analysis, supported by EBSD and SEM, reveals that the higher toughness in the R0-45 orientation is linked to a combination of smaller effective grain size along the crack path, higher levels of geometrically necessary dislocations (GND), and increased kernel average misorientation (KAM), which collectively enhance plastic accommodation and crack-tip shielding. These findings support and reinforce the established understanding of the relationship between microstructure and anisotropic fracture behavior in LPBF IN718, facilitating its practical application in the design and orientation of additively manufactured components.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Universidad Industrial de Santander, Bucaramanga 680002, Colombia.
- Aeronautics Advanced Manufacturing Center, CFAA, 48170 Zamudio, Spain.
- Department of Mechanical Engineering, Escuela de Ingeniería de Bilbao, Universidad del País Vasco, 48013 Bilbao, Spain.
- Department of Mechanical Engineering, Universidad de La Serena, La Serena 1720170, Chile.
ORCID-Profile: José David Perez-Ruiz, Wilmer Velilla-Díaz, Mikel Abasolo, Gaizka Gómez Escudero, Luis Norberto López de Lacalle
Förderung
- National Agency for Research and Development of Chile (ANID)
- Basque Government
- NEOPHYM project
Zitieren
APA
Perez-Ruiz, J. D., Velilla-Díaz, W., Abasolo, M., Gómez Escudero, G., & López de Lacalle, L. N. (2025). Effect of Microstructure and Crystallographic Texture on the Fracture Toughness Anisotropy of LPBF IN718. Materials, 18(16), 3737. https://doi.org/10.3390/ma18163737
Vancouver
Perez-Ruiz JD, Velilla-Díaz W, Abasolo M, Gómez Escudero G, López de Lacalle LN. Effect of Microstructure and Crystallographic Texture on the Fracture Toughness Anisotropy of LPBF IN718. Materials. 2025;18(16):3737. doi:10.3390/ma18163737
BibTeX
@article{PerezRuiz2025,
author = {Perez-Ruiz, José David and Velilla-Díaz, Wilmer and Abasolo, Mikel and Gómez Escudero, Gaizka and López de Lacalle, Luis Norberto},
title = {Effect of Microstructure and Crystallographic Texture on the Fracture Toughness Anisotropy of LPBF IN718},
journal = {Materials},
year = {2025},
volume = {18},
number = {16},
pages = {3737},
doi = {10.3390/ma18163737}
}
EUVIMED