Effect of Different Fine Aggregate Characteristics on Fracture Toughness and Microstructure of Sand Concrete
Materials · 03.03.2023 · 16 (5) · 2080
DOI: 10.3390/ma16052080 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 03.03.2023. Verfasst von Zhihua Sun und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Chang'an University, Xi'an 710061, China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Key Research and Development Program Project of Shaanxi Province; The plan of China Construction Corporation, Key Research and Development Program Project of Shaanxi Province, China Construction Corporation.
Abstract (Originalsprache)
The fracture toughness of sand concrete is affected by aggregate characteristics. In order to study the possibility of exploiting tailings sand, available in large quantities in sand concrete, and find an approach to improve the toughness of sand concrete by selecting appropriate fine aggregate. Three distinct fine aggregates have been used. After characterizing the fine aggregate used, the mechanical properties were tested to characterize the toughness of sand concrete, the box-counting fractal dimensions were calculated to analyze the roughness of fracture surfaces, and the microstructure was tested to observe the path and width of microcracks and hydration products in sand concrete. The results show that the mineral composition of fine aggregates is close, but their fineness modulus, fine aggregate angularity (FAA) and gradation vary considerably; FAA has a significant impact on the fracture toughness of sand concrete. The higher the FAA value, the more resistant it is to crack expansion; with the FAA values of from 32 s to 44 s, the microcrack width in sand concrete was reduced from 0.25 um to 0.14 um; The fracture toughness and microstructure of sand concrete are also related to the gradation of fine aggregates, the better gradation can improve the performance of the interfacial transition zone (ITZ). The hydration products in the ITZ are also different because more reasonable gradation of aggregates reduces the voids between the fine aggregates and the cement paste and restrains the full growth of crystals. These results demonstrate that sand concrete has promising applications in the field of construction engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Chang'an University, Xi'an 710061, China.
- Shaanxi Hongcheng Mining Technology Corporation Limited, Xi'an 710001, China.
- Beijing Building Research Institute Corporation Limited of CSCEC, Beijing 100076, China.
Förderung
- The Key Research and Development Program Project of Shaanxi Province; The plan of China Construction Corporation
- Key Research and Development Program Project of Shaanxi Province
- China Construction Corporation
- Xi’an City Science and Technology Plan Project
Zitieren
APA
Sun, Z., Xiong, J., Cao, S., Zhu, J., Jia, X., Hu, Z., & Liu, K. (2023). Effect of Different Fine Aggregate Characteristics on Fracture Toughness and Microstructure of Sand Concrete. Materials, 16(5), 2080. https://doi.org/10.3390/ma16052080
Vancouver
Sun Z, Xiong J, Cao S, Zhu J, Jia X, Hu Z, et al. Effect of Different Fine Aggregate Characteristics on Fracture Toughness and Microstructure of Sand Concrete. Materials. 2023;16(5):2080. doi:10.3390/ma16052080
BibTeX
@article{Sun2023,
author = {Sun, Zhihua and Xiong, Jin and Cao, Shubo and Zhu, Jianxiong and Jia, Xuzhi and Hu, Zhigang and Liu, Kaiping},
title = {Effect of Different Fine Aggregate Characteristics on Fracture Toughness and Microstructure of Sand Concrete},
journal = {Materials},
year = {2023},
volume = {16},
number = {5},
pages = {2080},
doi = {10.3390/ma16052080}
}
EUVIMED